Advanced TidGen Power System - Composites Structural Testing
Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength, flexural strength, tensile strength, and tensile fracture surface observations. The reduction of mechanical properties was found to be higher in the initial stages which showed saturation in the longer durations of seawater immersion. The flexural strength and ultimate tensile strength (UTS) dropped by about 35% and 27% for glass/epoxy, 22% and 15% for glass/vinyl ester, 48% and 34% for carbon/epoxy 28%, and 21% carbon/vinyl ester composites respectively. The water uptake behavior of epoxy-based composites was inferior to that of the vinyl system.
This is an investigation into the mechanical properties of fiber/resin composites and the effects of water saturation on them. State of the technology research was reviewed to select candidates for further testing. Shear strength and shear modulus of different combinations of commercial fibers, resins, and coating systems were determined.
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "Andrew Krumpe",
"@type": "vcard:Contact",
"hasEmail": "mailto:akrumpe@orpc.co"
}
|
| dataQuality |
true
|
| description | Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength, flexural strength, tensile strength, and tensile fracture surface observations. The reduction of mechanical properties was found to be higher in the initial stages which showed saturation in the longer durations of seawater immersion. The flexural strength and ultimate tensile strength (UTS) dropped by about 35% and 27% for glass/epoxy, 22% and 15% for glass/vinyl ester, 48% and 34% for carbon/epoxy 28%, and 21% carbon/vinyl ester composites respectively. The water uptake behavior of epoxy-based composites was inferior to that of the vinyl system. This is an investigation into the mechanical properties of fiber/resin composites and the effects of water saturation on them. State of the technology research was reviewed to select candidates for further testing. Shear strength and shear modulus of different combinations of commercial fibers, resins, and coating systems were determined. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "ORPC TidGen Composites Structural Testing Technical Report.pdf",
"format": "pdf",
"accessURL": "https://mhkdr.openei.org/files/316/EE0007820.D8.1.RE-TD20-10713%20Rev%20A.pdf",
"mediaType": "application/pdf",
"description": "Technical report investigating the mechanical properties of fiber/resin composites and the effects of water saturation on them for the Advanced TidGen Power System."
},
{
"@type": "dcat:Distribution",
"title": "ORPC TidGen Composite Fatigue Analysis Procedure",
"format": "HTML",
"accessURL": "https://mhkdr.openei.org/submissions/319",
"mediaType": "text/html",
"description": "A procedure was described for performing a fatigue analysis of composite foils for an MHK generator. The steps included generating load data, S-N (Stress versus Number of cycles to failure) diagrams through fatigue testing, cycle counts, damage versus load, and cumulative damage. An illustrative analysis was then performed using representative S-N data."
}
]
|
| identifier | https://data.openei.org/submissions/7973 |
| issued | 2020-01-06T07:00:00Z |
| keyword |
[
"CEC",
"Hydrokinetic",
"MHK",
"Marine",
"ORPC",
"Ocean Renewable Power Company",
"TidGen",
"composite",
"composite structural testing",
"composites",
"cross flow turbine",
"energy",
"fatigue",
"flexural strength",
"fluid forces",
"inertial froces",
"lab data",
"lab test",
"material",
"material properties",
"material selection",
"mechanical",
"mechanical properties",
"modeling",
"power",
"reactive forces",
"shear modulus",
"shear strength",
"structural",
"technology",
"technology research",
"tensile fracture",
"tensile strength",
"test",
"testing",
"tidal",
"water immersion"
]
|
| landingPage | https://mhkdr.openei.org/submissions/316 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2020-06-01T19:26:19Z |
| programCode |
[
"019:009"
]
|
| projectLead | Yana Shininger |
| projectNumber | EE0007820 |
| projectTitle | Advanced TidGen Power System |
| publisher |
{
"name": "ORPC Inc.",
"@type": "org:Organization"
}
|
| spatial |
"{"type":"Polygon","coordinates":[[[-180,-83],[180,-83],[180,83],[-180,83],[-180,-83]]]}"
|
| title | Advanced TidGen Power System - Composites Structural Testing |
