Found 24 datasets matching filters.
-
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a non-standard hot isostatic...
Search relevance: 1.00 | Views last month: 27 | Published on: 2025-08-02 -
The AM EoL - Material Flow Analysis and GREENSCOPE_11-25-23_TradeOff.xlsx file contains the data supporting the GREENSCOPE sustainability assessment associated with the management of end-of-life...
Search relevance: 1.00 | Views last month: 6 | Published on: 2025-09-25 -
These images, videos, and tables show experimental data, where single lines of viscoelastic inks were extruded into moving viscoelastic support baths. Lines were printed at varying angles relative...
Search relevance: 1.00 | Views last month: 3 | Published on: 2025-08-02 -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
The data presented includes the total elemental analysis, via ICP-MS) of aerosol emissions from 3D printer of thermoplastic polymers. This dataset is associated with the following...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
Supplemental material for "Hughes MF, Clapper HM, Tedla G, Sowers TD, Rogers KR. Simulated gastric leachate of 3D printer metal-fill filaments induces cytotoxic effects in rat and human intestinal...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
The data set contains the details on the thermal degradation that takes place during 3D printing of six commercially-available 3D printer filaments containing either carbon nanotubes or metal...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
Temperature profiles of acrylonitrile butadiene styrene (ABS) filament during material extrusion additive manufacturing. Printing temperature and velocities cover the full "printable" range of the...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
Three-dimensional (3D) food printing holds the potential to help reduce food waste by precise portion control and use of materials that are produced in excess or are otherwise discarded. This...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
S&T Project ID 19085 Final Report No. ST-2021-19085-4: Analysis of 6061 Aluminum Cold Spray Material
This final report is an analysis of 6061 aluminum cold spray material and its suitability for Bureau of Reclamation (Reclamation) purposes. Cold spray Al 6061 has significantly poorer mechanical...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
The data set contains the details on the thermal degradation that takes place during 3D printing of acrylonitrile butadiene styrene both with and without carbon nanotubes. Volatile organic...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
EPA employee associated with this research has retired. Supplemental material for this article contains additional information about the data, but for additional information on the data please...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
Data used to generate Table 2 and 3 in the manuscript Metal compositions of particle emissions from material extrusion 3D printing: Emission sources and indoor exposure modeling,...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
Raw data, software, standard operating procedure, and computer aided design files for the NIST-led publication "Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
These images, videos, and tables show experimental data, where single lines, pairs of lines, and trios of lines of viscoelastic silicone inks were extruded into moving viscoelastic support baths....
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02
