Found 7 datasets matching filters.
-
These sets of automated serial sectioning electron backscatter diffraction (EBSD) and X-ray computed tomography (XRCT) measurements were designed to produce spatially registered, multi-modal...
Search relevance: 1.00 | Views last month: 9 | Published on: 2025-08-02 -
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication....
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens were extracted from blocks at...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
The following optical micrograph data files are provided in support of the AM Bench 2018 modeling challenges associated with bare plate single track laser scans performed on the NIST Additive...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02
