Found 18 datasets matching filters.
-
The dataset was used to develop the tables and figures in the manuscript. This dataset is associated with the following publication: Williams, D., C. Parrett, M. Schock, C. Muhlen, P. Donnelly,...
Search relevance: 1.00 | Views last month: 5 | Published on: 2025-08-02 -
Corrosion is defined as the deterioration of a material due to chemical reactions with its environment. Understanding corrosion, and corrosion rates, is necessary to ensure that the design of...
Search relevance: 1.00 | Views last month: 5 | Published on: 2025-08-02 -
Data shown in the figures presented in the manuscript. This dataset is associated with the following publication: Lee, W.H., D. Wahman, D. Lytle, J. Pressman, and J. Chung. Microelectrode...
Search relevance: 1.00 | Views last month: 4 | Published on: 2025-08-02 -
Transportation of damaged, defective, or recalled (DDR) lithium-ion batteries (LIBs) of is an important emerging issue as the use of electronic vehicles (EVs) and other LIB based items...
Search relevance: 1.00 | Views last month: 3 | Published on: 2025-08-02 -
The data resulted from bench and other studies, and were used to produce manuscript plots. This dataset is associated with the following publication: Lytle, D., M. Schock, J. Leo, and B. Barnes....
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
This dataset contains data recordings used to generate the figures included in the Post Access Report for the TEAMER project "Biofouling and Corrosion Study for a Novel Linear Guided Wave Energy...
Search relevance: 1.00 | Views last month: 1 | Published on: 2026-01-29 -
Data set associated with manuscript Applying Microelectrodes to Investigate Aged Ductile Iron and Copper Coupon Reactivity during Free Chlorine Application. This dataset is associated with the...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
Storage Tank Legionella and Community. This dataset is associated with the following publication: Qin, K., I. Struewing, J. Santodomingo, D. Lytle, and J. Lu. Opportunistic Pathogens and...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to the receiver line, while Part 2...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
S&T Project ID 19085 Final Report No. ST-2021-19085-4: Analysis of 6061 Aluminum Cold Spray Material
This final report is an analysis of 6061 aluminum cold spray material and its suitability for Bureau of Reclamation (Reclamation) purposes. Cold spray Al 6061 has significantly poorer mechanical...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground at 47 sites representing...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
Additive manufacturing can provide an advantage over traditional manufacturing methods in situations where production of parts is limited (custom fabrication), or where parts are complex and/or...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
This study evaluated reuse of lime softening sludge, generated from drinking water treatment utilities, as an environmental sorbent for capturing SO2 and heavy metals in wet scrubbers of...
Search relevance: 1.00 | Views last month: 0 | Published on: 2025-08-02 -
This final report is an analysis of Powder Bed Fusion (PBF) stainless steel 316L and its suitability for Bureau of Reclamation (Reclamation) purposes. An open cube was printed using PBF additive...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
Profilometry of 316L stainless steel disks that are cold rolled, additively manufactured, additively manufactured and heat treated, and additively manufactured having undergone a sensitization and...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
This project undertook a collaboration with Oak Ridge National Laboratory to determine the feasibility and cost and to demonstrate the efficacy of additively manufactured replacements for selected...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06
