Found 45 datasets matching filters.
-
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a non-standard hot isostatic...
Search relevance: 1.00 | Views last month: 27 | Published on: 2025-08-02 -
This dataset is a collection of emissions data during extrusion processes used to support regression modeling research. The data were collected from various academic publications and patents....
Search relevance: 1.00 | Views last month: 12 | Published on: 2025-08-02 -
X-ray computed tomography (XCT) datasets with known ground truth pores were developed using realistic XCT simulation. Non-overlapping spherical pores of varying sizes are randomly distributed in a...
Search relevance: 1.00 | Views last month: 10 | Published on: 2025-08-02 -
These sets of automated serial sectioning electron backscatter diffraction (EBSD) and X-ray computed tomography (XRCT) measurements were designed to produce spatially registered, multi-modal...
Search relevance: 1.00 | Views last month: 9 | Published on: 2025-08-02 -
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and...
Search relevance: 1.00 | Views last month: 7 | Published on: 2025-08-02 -
The AM EoL - Material Flow Analysis and GREENSCOPE_11-25-23_TradeOff.xlsx file contains the data supporting the GREENSCOPE sustainability assessment associated with the management of end-of-life...
Search relevance: 1.00 | Views last month: 6 | Published on: 2025-09-25 -
This dataset contains thermographic measurements acquired during single and multiple track scans on bare substrates and on single layers of powder. The substrates and powder are nickel alloy 625...
Search relevance: 1.00 | Views last month: 5 | Published on: 2025-08-02 -
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and nozzle type (standard and grid).
Search relevance: 1.00 | Views last month: 3 | Published on: 2025-08-02 -
These images, videos, and tables show experimental data, where single lines of viscoelastic inks were extruded into moving viscoelastic support baths. Lines were printed at varying angles relative...
Search relevance: 1.00 | Views last month: 3 | Published on: 2025-08-02 -
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication....
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
This data set contains files included in the detailed instructional demonstration paper submitted to Integrating Materials and Manufacturing Innovation. The detailed instructional demonstration...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
Data that was used to generate the figures in Wade, A.M., D.M. Peloquin, J.M. Matheson, and T.P. Luxton (2023) Dermal and oral exposure risks to heavy metals from 3D printing metal-fill...
Search relevance: 1.00 | Views last month: 2 | Published on: 2025-08-02 -
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens were extracted from blocks at...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
As described in the README.md file, the GitHub repository https://github.com/gruizmer/Generic_Exposure_Assessment_EoL_AdditiveManufacturing contains the data supporting the generic exposure...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
SolidWorks Part file (CAD file) for a CoCr "lattice" structure additively manufactured in a laser bed powder fusion (LPBF) system at NIST.
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02 -
Temperature profiles of acrylonitrile butadiene styrene (ABS) filament during material extrusion additive manufacturing. Printing temperature and velocities cover the full "printable" range of the...
Search relevance: 1.00 | Views last month: 1 | Published on: 2025-08-02
