Found 20 datasets matching filters.
-
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The coaxial-cable experiment conducted in the lab was with 80 m coaxial cable( RG-85). This experiment compares the TDR response between damaged and undamaged cable. For the damaged cable, the...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
Well completions are an integral part of providing safe, reliable and continuous access to underground resources such as oil, gas and geothermal resources. Completions are typically considered to...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
This experiment is testing the tube waves reflected from the bottom of the well. We put six single-channel geophones on the surface and a 24-channel downhole hydrophone into the well. The well is...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
This is a presentation on the Zonal Isolation Solution for Geothermal Wells project by PetroQuip Energy Services, presented by VP of operations Robert Coon. The project's objective was to design...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The Newberry Volcano EGS Demonstration in central Oregon, a 3 year project started in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
This engineering design and specification document contains the applications, specifications, testing, materials, and running methods for the Open-Hole Packer. The Open Hole Packer is designed to...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
This is an installation report detailing placement of the integrated fiber-optic cable behind casing in Utah FORGE well 16B(78)-32. These activities occurred in July of 2023 immediately after the...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to the receiver line, while Part 2...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The steel pipe experiment conducted in the lab was using 6 meter low-carbon steel pipe. We tested it with both dry and in-water condition. In the dry experimental setup, a coaxial cable acting as...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23 -
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-03-23
