Found 10 datasets matching filters.
-
This project aims to develop an innovative Geothermal ThermoElectric Generation (G-TEG) system specially designed to both generate electricity and extract high-value lithium (Li) from...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
S&T Project ID 19085 Final Report No. ST-2021-19085-4: Analysis of 6061 Aluminum Cold Spray Material
This final report is an analysis of 6061 aluminum cold spray material and its suitability for Bureau of Reclamation (Reclamation) purposes. Cold spray Al 6061 has significantly poorer mechanical...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
Configurations as tested and modeled in final phase of project for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
This is the Installation, Operations and Maintenance (IO&M) Plan for the Triton-C WEC based on the Detailed System Design Package (DDP), including a report and visuals pertaining to the overall...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate and test a novel half-scale...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
Technical report for public dissemination on the design progress for the Advanced TidGen(R) Power System.
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-27 -
Additive manufacturing can provide an advantage over traditional manufacturing methods in situations where production of parts is limited (custom fabrication), or where parts are complex and/or...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
This final report is an analysis of Powder Bed Fusion (PBF) stainless steel 316L and its suitability for Bureau of Reclamation (Reclamation) purposes. An open cube was printed using PBF additive...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06 -
This project undertook a collaboration with Oak Ridge National Laboratory to determine the feasibility and cost and to demonstrate the efficacy of additively manufactured replacements for selected...
Search relevance: 1.00 | Views last month: 0 | Published on: 2026-01-06
