• Organization: National Institute of Standards and Technology
• Updated: 2018-09-14 00:00:00

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of a continuing series of...

• zip
• zip
• zip
• zip
• zip
• zip
• +117 more

• Organization: National Institute of Standards and Technology
• Updated: 2018-05-18 00:00:00

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and...

• html
• zip
• none
• zip
• zip
• none
• +5 more

• Organization: National Institute of Standards and Technology
• Updated: 2023-07-21 00:00:00

The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate...

• none
• none
• none
• none
• none
• none
• +45 more

• Organization: National Institute of Standards and Technology
• Updated: 2025-05-08 00:00:00

The following optical micrograph data files are provided in support of the AM Bench 2018 modeling challenges associated with bare plate single track laser scans performed on the NIST Additive...

• none
• none
• none
• none
• none
• none
• +5 more

• Organization: National Institute of Standards and Technology
• Updated: 2022-09-27 00:00:00

This repository contains scripts and supporting information for a set of demonstrations related to the 2022 AM-Bench challenge series.In particular, the data used in this demonstration comes from...

• none

• Organization: National Institute of Standards and Technology
• Updated: 2023-09-21 00:00:00

Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power, scan speed, and laser spot ...

• none
• none
• none
• none
• none
• none
• +438 more