Found 10 datasets matching "IN625".
-
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication....
Search relevance: 96.01 | Views last month: 2 -
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser powder bed fusion (LPBF) 3D...
Search relevance: 89.28 | Views last month: 0 -
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power, scan speed, and laser spot ...
Search relevance: 83.51 | Views last month: 0 -
This document provides details on the experiment and associated measurement files available for download in the dataset ?In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy...
Search relevance: 61.17 | Views last month: 1 -
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and...
Search relevance: 57.46 | Views last month: 0 -
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build...
Search relevance: 44.38 | Views last month: 0 -
The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate...
Search relevance: 43.50 | Views last month: 0 -
This dataset provides surface height data from nickel super alloy 625 experiment samples built through laser powder bed fusion additive manufacturing. The experiment methodically varied part...
Search relevance: 30.80 | Views last month: 0 -
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build...
Search relevance: 29.61 | Views last month: 2 -
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of a continuing series of...
Search relevance: 28.98 | Views last month: 0
