• Organization: National Institute of Standards and Technology
• Updated: 2019-11-18 00:00:00

SRM 1450e Fibrous Glass Board - This Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials....

• html
• none
• none
• none
• none

• Organization: Department of Energy
• Updated: 2017-10-24T21:01:41Z

Data includes characterization results for novel thermoelectric materials developed specifically for power generation from low temperature geothermal brines. Materials characterization data...

• none
• xls
• xls

• Organization: National Institute of Standards and Technology
• Updated: 2013-11-13 00:00:00

Thermal conductivity data acquired previously for the establishment of Standard Reference Material (SRM) 1450, Fibrous Glass Board, as well as subsequent renewals 1450a, 1450b, 1450c, and 1450d,...

• Organization: Department of the Interior
• Updated: 2023-08-02T00:00:00Z

This tabular data set represents the STATSGO Soil Layer Attributes compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1)...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2016-09-14 00:00:00

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of silicon. A unit of SRM 3150 consists of 50 mL of solution...

• Organization: National Institute of Standards and Technology
• Updated: 2016-09-06 00:00:00

This Standard Reference Material (SRM) is intended as a primary calibration standard for the quantitative determination of fluoride using anion ion chromatography (IC) or other methods. A unit of...

• Organization: National Institute of Standards and Technology
• Updated: 2016-09-14 00:00:00

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of germanium. A unit of SRM 3120a consists of 50 mL of a single...

• Organization: National Institute of Standards and Technology
• Updated: 2017-01-04 00:00:00

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of tungsten. A unit of SRM 3163 consists of 50 mL of an acidified...

• Organization: Department of the Interior
• Updated: 2022-04-20T00:00:00Z

The Long Term Resource Monitoring (LTRM) program employs a destructive harvest method for sampling aquatic vegetation whereby a rake is dragged ~1.5 m over the substrate and plant materials are...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2016-09-14 00:00:00

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of antimony. A unit of SRM 3102a consists of 50 mL of an acidified...

• Organization: National Institute of Standards and Technology
• Updated: 2016-09-14 00:00:00

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of hafnium. A unit of SRM 3122 consists of 50 mL of an acidified...

• Organization: Department of Agriculture
• Updated: 2025-11-21

This study examined how indirect fire effects (improved forage quality) affect the density of and offtake by grasshoppers at two different times since fire and in unburned plots. Data include...

• xls
• pdf

• Organization: Department of the Interior
• Updated: 2024-01-26T16:49:43Z

This final report is an analysis of Powder Bed Fusion (PBF) stainless steel 316L and its suitability for Bureau of Reclamation (Reclamation) purposes. An open cube was printed using PBF additive...

• html
• pdf

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

An anti-material projectile which fragments wholly or in part due to impact shock on hitting a target thereafter penetrating the target causing damage. The projectile is preferably high density...

• html

• Organization: Department of Energy
• Updated: 2022-06-20T06:15:02Z

In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in...

• zip

• Organization: Department of the Interior
• Updated: 2023-12-13T00:00:00Z

Proppants used during hydraulic fracturing of oil and gas wells are manufactured to maximize petroleum yield by controlling the size, shape, density, and strength of the proppant material. The...

• xml
• xml

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The cold gas spray apparatus (1) has a high pressure gas generator (22) for the production of a high pressure gases and a nozzle (8) from which a cold gas particle stream (7) is emitted. An...

• html

• Organization: Department of the Interior
• Updated: 2020-08-26T00:00:00Z

The Sediment and Aquifer Characteristics dataset includes two, grid-based polygon feature classes. The first class uses a five-kilometer grid to show the density of lithologic logs available for...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2021-10-18 00:00:00

These data and the coarse-grain force-field parameters were used to produce publication (1) "Structure-dilute property relationships of comb-like macromolecules in a good solvent" by Robert J. S....

• none
• csv
• csv
• csv
• csv
• none

• Organization: National Aeronautics and Space Administration
• Updated: 2025-03-31

This paper presents a reliability-based prediction methodology to obtain the remaining useful life of composite materials subjected to fatigue degradation. Degradation phenomena such as stiffness...

• pdf