• Organization: Department of Energy
• Updated: 2020-06-01T19:26:19Z

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength,...

• pdf
• html

• Organization: National Institute of Standards and Technology
• Updated: 2019-10-10 00:00:00

To improve the reliability and design of armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the best efforts of...

• html
• none
• none
• none
• none
• none
• +35 more

• Organization: Department of Energy
• Updated: 2025-09-17T16:23:46Z

The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion....

• none
• zip
• pdf

• Organization: National Institute of Standards and Technology
• Updated: 2023-09-27 00:00:00

This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different studies. The IN718 parts were...

• none
• none
• none
• none
• none
• none
• +926 more

• Organization: Department of Energy
• Updated: 2019-11-15T00:05:00Z

Compilation of results for mechanical and fluid flow properties of analogue outcrop samples - experimental data for compressional and shear wave velocities, tensile strengths, and compressive...

• pdf
• csv

• Organization: National Institute of Standards and Technology
• Updated: 2025-02-18 00:00:00

This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...

• html
• zip
• xml
• pdf

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The present invention provides polyetherurethaneurea (PEUU) elastomers having an excellent combination of elastic properties including low modulus, high elongation, high tensile strength and a...

• html

• Organization: National Institute of Standards and Technology
• Updated: 2019-09-09 00:00:00

Traditionally, soft body armor has been made from materials such as poly(p-phenylene terephthalamide) (PPTA) and ultra-high molar mass polyethylene (UHMMPE). However, to diversify the fiber...

• html
• none
• zip
• none
• zip
• none
• +5 more

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

A dyeable polyparaphenylene terephthalamide fiber which has been wound once after spinnig and has not been dyed yet, characterized in that it has a tensile strength of 15 g/denier or more and a...

• html

• Organization: National Institute of Standards and Technology
• Updated: 2021-07-30 00:00:00

A compilation of single fiber tensile tests for 6 different materials at 8 different gauge lengths. Fibers included are 3 different aramids, a liquid crystal polyester, regenerated cellulose, and...

• none
• none
• zip
• none

• Organization: Department of Energy
• Updated: 2022-06-20T06:15:02Z

In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in...

• zip

• Organization: National Institute of Standards and Technology
• Updated: 2020-05-01 00:00:00

This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-static and dynamic loading...

• html
• csv
• none
• csv
• none
• csv
• +1097 more

• Organization: National Institute of Standards and Technology
• Updated: 2012-05-31 00:00:00

We present correlations found between the tensile strengths of yarns extracted from armor and the V50 ballistic limit when significant degradation of the mechanical properties of the extracted...

• html
• csv
• none
• csv
• none
• csv
• +5 more

• Organization: Department of the Interior
• Updated: 2024-01-26T16:49:27Z

This project undertook a collaboration with Oak Ridge National Laboratory to determine the feasibility and cost and to demonstrate the efficacy of additively manufactured replacements for selected...

• html
• pdf

• Organization: Department of Energy
• Updated: 2023-06-14T06:45:02Z

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major...

• pdf
• pdf

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

A yarn of collagen fiber of animal leather and the manufacturing process thereof, characterized in that the yarn is made of 1-100 % by weight of collagen fiber of animal leather, and 0-99 % by...

• html

• Organization: National Institute of Standards and Technology
• Updated: 2015-06-22

The NIST WWW Structural Ceramics Database (WebSCD) provides evaluated materials property data for a wide range of advanced ceramics known variously as structural ceramics, engineering ceramics,...

• html
• html

• Organization: Department of the Interior
• Updated: 2022-12-02T00:00:00Z

Fragile geologic features (FGFs) are elements of the landscape that are vulnerable to destruction during sufficiently strong earthquake ground shaking. As result, the observation of extant FGFs on...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2015-06-22 00:00:00

Property Data Summaries are collections of property values derived from surveys of published data. These collections typically focus on either one material or one particular property. Studies of...

• html

• Organization: National Institute of Standards and Technology
• Updated: 2025-02-18 00:00:00

Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a non-standard hot isostatic...

• none
• none
• none
• none
• none
• none
• +384 more