Found 84 datasets matching "bedload".
-
Bedload and ancillary data herein were used to calculate and compare the bedload-trapping efficiencies of four types of pressure-difference bedload samplers as part of episodic,...
Search relevance: 129.13 | Views last month: 0 -
A series of machine learning (ML) models were developed for Minnesota. The ML models were trained and tested using suspended sediment, bedload, streamflow, and geospatial data to predicted...
Search relevance: 125.41 | Views last month: 0 -
Average bedload flux measured by three Reid-type slot samplers
Search relevance: 123.98 | Views last month: 0 -
The U.S. Geological Survey (USGS) installed acoustic bedload monitoring systems at four sites along the Trinity River below Lewiston Dam to record the noise generated by mobilized bed material,...
Search relevance: 117.07 | Views last month: 0 -
Bedload sediment transport was calculated on the Elwha River, Washington to measure the amount of sediment transported along the riverbed during the 2016 water year. Bedload was measured using the...
Search relevance: 112.57 | Views last month: 0 -
This data set contains estimates of bedload transport entering San Francisco Bay from the Sacramento-San Joaquin Delta. Bedload was estimated following the methods of van Rijn (1984) for the...
Search relevance: 108.46 | Views last month: 0 -
A series of simple linear regression models were developed for the U.S. Geological Survey (USGS) streamgage at Rice Creek below Highway 8 in Mounds View, Minnesota (USGS station number 05288580)....
Search relevance: 96.90 | Views last month: 0 -
These data sets contain the estimated fluvial transport of bedload, suspended sediment, and silicate solutes in the watersheds of western Oregon and northwestern California. The estimates for...
Search relevance: 90.59 | Views last month: 0 -
Cumulative mass collected in the center sampler
Search relevance: 76.58 | Views last month: 0 -
Cumulative mass collected in the right sampler
Search relevance: 76.58 | Views last month: 0 -
Elwha River surrogate bed load continuous bed load measurements for Water Years 2013 through 2019. In 2008 and 2009, a series of bed load impact plates was installed across a channel spanning weir...
Search relevance: 76.11 | Views last month: 0 -
Cumulative mass collected in the left sampler
Search relevance: 73.50 | Views last month: 0 -
Calculated sediment flux per unit width of channel into the right sampler box
Search relevance: 72.40 | Views last month: 0 -
Calculated sediment flux per unit width of channel into the center sampler box
Search relevance: 72.40 | Views last month: 0 -
Calculated sediment flux per unit width of channel into the left sampler box
Search relevance: 72.09 | Views last month: 0 -
These data were compiled for analyses of sediment transport within the Chippewa River, WI. Objective(s) of our study were to determine sand loads contributed by the Chippewa River to the...
Search relevance: 63.60 | Views last month: 1 -
Fecal indicator concentrations, and water quality physico-chemical parameters. This dataset is associated with the following publications: Bradshaw, J.K., B. Snyder, D. Spidle, R. Sidle, K....
Search relevance: 61.82 | Views last month: 0 -
The U.S. Geological Survey, in cooperation with Ashokan Watershed Stream Management Program, investigated the feasibility of bedload monitoring in the upper Esopus Creek watershed, Ulster and...
Search relevance: 47.59 | Views last month: 0 -
Daily values of discharge and sediment loads were measured and estimated at U.S. Geological Survey gaging station 12046260, on the Elwha River at the diversion near Port Angeles, Washington. Daily...
Search relevance: 44.64 | Views last month: 0 -
This data set includes new and historical sediment data collected at the U.S. Geological Survey (USGS) streamgage on the Nemadji River near South Superior, Wisconsin (station number 04024430) from...
Search relevance: 40.96 | Views last month: 0
