• Organization: Department of Energy
• Updated: 2019-07-16T20:08:35Z

Mineralogical and lithological data from core samples taken at various geothermal wells in the Great Basin: Dixie Valley, Beowawe, Roosevelt, Mammoth, Steamboat Springs, Coso

• pdf

• Organization: Department of the Interior
• Updated: 2024-03-25T00:00:00Z

The data herein are geochemical (from X-Ray fluorescence spectrometry), grain size (percent clay, silt, sand), lithological (loss on ignition data), bathymetric, reconstructed IVT, and radioactive...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2024-08-01T00:00:00Z

These data are the geochemical (from X-ray fluorescence spectrometry), grain size, lithological (loss on ignition), diatom assemblages (taxa counts), bathymetric, and radioactive isotopes (210-Pb,...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2023-08-02T00:00:00Z

This tabular data set represents select geochemical characteristics based on Olson geology types in surface or near surface geology (Olson, 2014) compiled for two spatial components of the NHDPlus...

• xml
• xml

• Organization: Department of Energy
• Updated: 2023-07-27T00:09:36Z

This is a digitized geologic map, in shapefile format, including rock unit lithological descriptions, faults, and dikes.

• zip
• zip
• zip

• Organization: Department of Energy
• Updated: 2019-10-17T19:24:23Z

Mineralogical, lithological, and geospatial data of drill cuttings from exploration production wells in Beowawe, Dixie Valley and Roosvelt Hot Springs. These data support whole rock analyses for...

• xls
• xls

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological potassium oxide (K2O) content in surface or near surface geology. We derived these rasters by calculating the average percent K2O content for...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2020-08-26T00:00:00Z

The electrical conductivity of the earth is used to help infer lithological and pore fluid properties. Various geophysical methods can provide estimates of the distribution of below ground...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological the compressive strength, measured as uniaxial compressive strength (in megaPascals, MPa) of surface or near surface geology. We derived these...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological aluminum oxide (Al2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Al2O3 content for...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological magnesium oxide (MgO) content in surface or near surface geology. We derived these rasters by calculating the average percent MgO content for...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological nitrogen (N) content in surface or near surface geology. We derived these rasters by calculating the average percent N content for each map unit...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological phosphorus pentoxide (P2O5) content in surface or near surface geology. We derived these rasters by calculating the average percent P2O5 content...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological the hydraulic conductivity (in micrometers per second) of surface or near surface geology. We derived these rasters by calculating the average...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2020-10-16T00:00:00Z

The distribution of permafrost in cold regions is subject to temporal and spatial changes influenced by climate, landscape disturbance, and ecosystem succession. Remote sensing from airborne and...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2020-08-18T00:00:00Z

The electrical conductivity of the earth is used to help infer lithological and pore fluid properties. Various geophysical methods can provide estimates of the distribution of below ground...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological calcium oxide (CaO) content in surface or near surface geology. We derived these rasters by calculating the average percent CaO content for each...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological sulfur (S) content in surface or near surface geology. We derived these rasters by calculating the average percent S content for each map unit in...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological sodium oxide (Na2O) content in surface or near surface geology. We derived these rasters by calculating the average percent Na2O content for each...

• xml
• xml

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological silicon dioxide (SiO2) content in surface or near surface geology. We derived these rasters by calculating the average percent SiO2 content for...

• xml
• xml