• Organization: Department of the Interior
• Updated: 2023-08-10T00:00:00Z

The data are time series of laboratory strength and permeability measurements of 5 rock types. The tests were conducted as part of an interlaboratory comparison to determine repeatability of...

• xml
• xml

• Organization: Department of Energy
• Updated: 2020-01-27T23:11:31Z

The data include compressive strength and Young's Modulus recoveries in steam and carbonate environments at 270 deg C for four chemically different cement composites after imposed controlled damaged.

• xls

• Organization: Department of the Interior
• Updated: 2022-08-05T00:00:00Z

This raster depicts the percentage of lithological the compressive strength, measured as uniaxial compressive strength (in megaPascals, MPa) of surface or near surface geology. We derived these...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2022-04-05 00:00:00

After recently completing a five year renovation, the NIST anechoic chamber for radio-frequency field strength measurements was returned to service. Tests of field probe transfer functions can now...

• csv
• csv
• csv
• none

• Organization: National Institute of Standards and Technology
• Updated: 2016-08-15 00:00:00

Abstract: The behavior of high-strength structural steel at elevated temperatures, especially under shear loading, is not well established in the literature. Set of data presents results from...

• html

• Organization: U.S. Environmental Protection Agency
• Updated: 2018-04-11

Source strength functions (SSF), defined as contaminant mass discharge or flux-averaged concentration from dense nonaqueous phase liquid (DNAPL) source zones as a function of time, provide a...

• xml

• Organization: Department of Energy
• Updated: 2021-07-08T19:34:30Z

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and...

• none
• html

• Organization: National Institute of Standards and Technology
• Updated: 2019-10-10 00:00:00

To improve the reliability and design of armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the best efforts of...

• html
• none
• none
• none
• none
• none
• +35 more

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The invention relates to the field of materials science and to high-strength planar structures for the protection of vehicles and people. The aim of the invention is to provide high-strength...

• html

• Organization: National Aeronautics and Space Administration
• Updated: 2025-04-01

This data set contains Antarctica radar sounder echo strength profiles from the Hi-Capability Radar Sounder (HiCARS) Version 1 instrument. The data were collected by scientists working on the...

• html
• html
• html
• html
• html
• html
• +5 more

• Organization: National Aeronautics and Space Administration
• Updated: 2025-04-01

This data set contains Antarctica radar sounder echo strength profiles from the Hi-Capability Radar Sounder (HiCARS) Version 2 instrument. The data were collected by scientists working on the...

• html
• html
• html
• html
• html
• html
• +5 more

• Organization: National Aeronautics and Space Administration
• Updated: 2025-03-31

This data set contains spot elevation measurements with corresponding waveforms of Greenland, Arctic, and Antarctic sea ice. The data complement the IceBridge ATM L1B Near-Infrared Waveforms data,...

• html
• html
• html
• html
• html
• html
• +1 more

• Organization: National Aeronautics and Space Administration
• Updated: 2026-02-10

The Extragalactic First Look Survey is composed of 4 square degrees of imaging with MIPS and IRAC centered at J1718+5930, with extensive ancillary data from ground-based optical and radio...

• none
• html

• Organization: Department of the Interior
• Updated: 2023-06-05T00:00:00Z

Twenty-four piston cores (and associated trigger cores) were collected from the source zone of the Currituck Landslide Complex and upper slope adjacent to Baltimore Canyon by the U.S. Geological...

• xml
• xml

• Organization: National Oceanic and Atmospheric Administration, Department of Commerce
• Updated: 2019-04-24T00:00:00.000+00:00

We flew an oceanographic profiling lidar over sections of the Chukchi and Beaufort Seas during the last half of July, 2017. The lidar returns were processed to obtain ice coverage and to identify...

• none
• none
• none
• none
• none
• none
• +1 more

• Organization: U.S. Environmental Protection Agency
• Updated: 2016-09-19

The data set includes estimations of energy required for processes related to the operation of Anaerobic Membrane Bioreactors. This dataset is associated with the following publication: Crone,...

• html
• xml

• Organization: Department of Energy
• Updated: 2024-06-13T18:51:13Z

The data files below summarize the results from various experiments testing properties of high-temperature self-healing inorganic cement composites. These properties include cement-carbon steel...

• none
• none
• none
• none
• pdf

• Organization: Department of Energy
• Updated: 2020-06-01T19:26:19Z

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength,...

• pdf
• html

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

Highly stretchable gel articles are prepared by contacting a shaped solvent-containing or solvent-free article of a high molecular weight polyolefin with a gaseous or liquid swelling agent at...

• html

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

A process for making a high-strength spun yarn begins by feeding one or more tows of substantially uncrimped continuous filaments of high-modulus material having a tensile modulus exceeding about...

• html