Found 55 datasets matching "tensile".
-
A compilation of single fiber tensile tests for 6 different materials at 8 different gauge lengths. Fibers included are 3 different aramids, a liquid crystal polyester, regenerated cellulose, and...
Search relevance: 124.67 | Views last month: 0 -
These data and test descriptions are from a set of primarily tensile hydraulic-fracture stimulations in wells E2-TC and E2-TU and a subsequent chilled water circulation test conducted by injecting...
Search relevance: 108.55 | Views last month: 0 -
Flexible Unidirectional (UD) composite laminates are commonly being used for ballistic-resistant body armor. These laminates comprise UD layers, each constructed by laminating thin layers of...
Search relevance: 105.07 | Views last month: 0 -
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...
Search relevance: 97.36 | Views last month: 2 -
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens were extracted from blocks at...
Search relevance: 91.34 | Views last month: 1 -
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four materials associated with the...
Search relevance: 88.62 | Views last month: 1 -
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build...
Search relevance: 86.24 | Views last month: 2 -
The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered from the buildings to provide...
Search relevance: 75.81 | Views last month: 0 -
To improve the reliability and design of armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the best efforts of...
Search relevance: 74.53 | Views last month: 0 -
Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength,...
Search relevance: 74.39 | Views last month: 0 -
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-static and dynamic loading...
Search relevance: 71.44 | Views last month: 0 -
Traditionally, soft body armor has been made from materials such as poly(p-phenylene terephthalamide) (PPTA) and ultra-high molar mass polyethylene (UHMMPE). However, to diversify the fiber...
Search relevance: 65.15 | Views last month: 0 -
This dataset contains a reinterpretation of the trip 3, Thrubit FMI log from Utah FORGE well 16B(78)-32, covering measured depths from 6,254 to 10,839 feet. Acquired by Schlumberger on May 23,...
Search relevance: 64.86 | Views last month: 1 -
The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion....
Search relevance: 55.28 | Views last month: 1 -
Includes test data from Confined Brazilian Tests. The tests were aim at investigating the rock failure envelope of four different lithologies including Indiana limestone, Scioto sandstone, Grey...
Search relevance: 52.16 | Views last month: 0 -
The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset...
Search relevance: 47.19 | Views last month: 0 -
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different studies. The IN718 parts were...
Search relevance: 46.76 | Views last month: 0 -
Highly stretchable gel articles are prepared by contacting a shaped solvent-containing or solvent-free article of a high molecular weight polyolefin with a gaseous or liquid swelling agent at...
Search relevance: 43.81 | Views last month: 0 -
A Crankshaft bearing assembly for supporting a crankshaft for rotation about a crankshaft axis within an engine having an aluminum engine block, the crankshaft bearing assembly including at least...
Search relevance: 43.52 | Views last month: 0 -
Jam fault scenarios with tensile (-40 lbs) load (diagnostic and prognostic).
Search relevance: 43.11 | Views last month: 0
