• Organization: National Institute of Standards and Technology
• Updated: 2021-07-30 00:00:00

A compilation of single fiber tensile tests for 6 different materials at 8 different gauge lengths. Fibers included are 3 different aramids, a liquid crystal polyester, regenerated cellulose, and...

• none
• none
• zip
• none

• Organization: National Institute of Standards and Technology
• Updated: 2018-08-31 00:00:00

Flexible Unidirectional (UD) composite laminates are commonly being used for ballistic-resistant body armor. These laminates comprise UD layers, each constructed by laminating thin layers of...

• html
• zip
• none
• zip
• none
• zip
• +65 more

• Organization: Department of Energy
• Updated: 2024-06-03T18:39:47Z

These data and test descriptions are from a set of primarily tensile hydraulic-fracture stimulations in wells E2-TC and E2-TU and a subsequent chilled water circulation test conducted by injecting...

• html
• xls
• zip
• none

• Organization: National Institute of Standards and Technology
• Updated: 2020-05-01 00:00:00

This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-static and dynamic loading...

• html
• csv
• none
• csv
• none
• csv
• +1097 more

• Organization: Department of Energy
• Updated: 2020-06-01T19:26:19Z

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength,...

• pdf
• html

• Organization: National Institute of Standards and Technology
• Updated: 2019-09-09 00:00:00

Traditionally, soft body armor has been made from materials such as poly(p-phenylene terephthalamide) (PPTA) and ultra-high molar mass polyethylene (UHMMPE). However, to diversify the fiber...

• html
• none
• zip
• none
• zip
• none
• +5 more

• Organization: Department of Energy
• Updated: 2025-09-17T16:23:46Z

The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion....

• none
• zip
• pdf

• Organization: National Institute of Standards and Technology
• Updated: 2021-08-02 00:00:00

This dataset contains mechanical testing data at two different loading rates for two different aging conditions (wet and dry at 70 °C) for five different extraction time points for ultra high...

• html
• csv
• none
• zip
• none
• zip
• +45 more

• Organization: Department of Energy
• Updated: 2023-06-14T06:45:02Z

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major...

• pdf
• pdf

• Organization: Department of the Interior
• Updated: 2023-05-31T00:00:00Z

We performed laboratory time-dependent creep and stress-oscillation earthquake simulations in uniaxial loading in compression and tension on four blocks of porphyritic dacite collected from...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2022-03-25 00:00:00

Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only.  96 tensile specimens were extracted from blocks at...

• zip
• zip
• none
• xml
• none
• pdf
• +1 more

• Organization: National Institute of Standards and Technology
• Updated: 2020-04-03 00:00:00

This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four materials associated with the...

• html
• pdf
• none
• csv
• none
• pdf
• +227 more

• Organization: National Institute of Standards and Technology
• Updated: 2019-10-10 00:00:00

To improve the reliability and design of armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the best efforts of...

• html
• none
• none
• none
• none
• none
• +35 more

• Organization: National Institute of Standards and Technology
• Updated: 2012-05-31 00:00:00

We present correlations found between the tensile strengths of yarns extracted from armor and the V50 ballistic limit when significant degradation of the mechanical properties of the extracted...

• html
• csv
• none
• csv
• none
• csv
• +5 more

• Organization: Department of the Interior
• Updated: 2024-01-26T16:49:27Z

This project undertook a collaboration with Oak Ridge National Laboratory to determine the feasibility and cost and to demonstrate the efficacy of additively manufactured replacements for selected...

• html
• pdf

• Organization: National Institute of Standards and Technology
• Updated: 2022-08-24 00:00:00

Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication....

• pdf
• none
• csv
• csv
• csv
• csv
• +1 more

• Organization: Department of Energy
• Updated: 2021-11-08T18:36:23Z

Includes test data from Confined Brazilian Tests. The tests were aim at investigating the rock failure envelope of four different lithologies including Indiana limestone, Scioto sandstone, Grey...

• html
• none

• Organization: Department of Energy
• Updated: 2020-03-12T17:21:21Z

This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets...

• zip