2017 seismic imaging of the West Napa Fault Zone, St. Helena, California
In April 2017, the U.S. Geological Survey acquired high resolution P- and S-wave seismic data across the suspected trace of the West Napa Fault zone in St. Helena, California. We acquired seismic reflection, refraction, and guided-wave data along a 215-m-long profile across the expected trend of the West Napa Fault zone. To acquire the reflection and refraction data, we co-located shots and geophones, spaced every 2 m along the profile. We used 109 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 108 P-wave shots, and 109 SercelTM L28-LBH S-wave (4.5-Hz horizontal-component) geophones with a sensitivity of 31.3 volts/meter/second to record 108 S-wave shots. We generated P-wave data using one of two active sources depending on site accessibility: a 226-kg accelerated weight drop (AWD) and a 3.5-kg sledgehammer and steel plate combination. S-wave sources were generated by horizontally striking an aluminum block with a 3.5-kg sledgehammer. We acquired fault zone guided wave data by generating P- (AWD) and S-wave (angle AWD) energy approximately 225 m north of the P- and S-wave recording arrays. All data were recorded using two 60-channel Geometrics Stratavisor NX-60TM seismographs with a 24-bit analog-to-digital converter with a roll-along descaling factor (Subcommittee of the SEG Engineering and Groundwater Geophysics Committee, 1990); the seismographs were connected to the P- and S-wave geophones via refraction cables. Each shot was recorded for two seconds, with data recording starting 100 ms before the actual time of the shot. Data were recorded at a sampling rate of 0.5 ms, or 2000 samples per second. This report provides the metadata needed to utilize the seismic data.
Reference:
Subcommittee of the SEG Engineering and Groundwater Geophysics Committee, Pullan,
S. E., Chairman, 1990, Recommended standard for seismic (/radar) data files in the
personal computer environment: Geophysics, vol. 55, no. 9, p. 1260-1271.
Complete Metadata
| accessLevel | public |
|---|---|
| bureauCode |
[
"010:12"
]
|
| contactPoint |
{
"fn": "Joanne H Chan",
"@type": "vcard:Contact",
"hasEmail": "mailto:jchan@usgs.gov"
}
|
| description | In April 2017, the U.S. Geological Survey acquired high resolution P- and S-wave seismic data across the suspected trace of the West Napa Fault zone in St. Helena, California. We acquired seismic reflection, refraction, and guided-wave data along a 215-m-long profile across the expected trend of the West Napa Fault zone. To acquire the reflection and refraction data, we co-located shots and geophones, spaced every 2 m along the profile. We used 109 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 108 P-wave shots, and 109 SercelTM L28-LBH S-wave (4.5-Hz horizontal-component) geophones with a sensitivity of 31.3 volts/meter/second to record 108 S-wave shots. We generated P-wave data using one of two active sources depending on site accessibility: a 226-kg accelerated weight drop (AWD) and a 3.5-kg sledgehammer and steel plate combination. S-wave sources were generated by horizontally striking an aluminum block with a 3.5-kg sledgehammer. We acquired fault zone guided wave data by generating P- (AWD) and S-wave (angle AWD) energy approximately 225 m north of the P- and S-wave recording arrays. All data were recorded using two 60-channel Geometrics Stratavisor NX-60TM seismographs with a 24-bit analog-to-digital converter with a roll-along descaling factor (Subcommittee of the SEG Engineering and Groundwater Geophysics Committee, 1990); the seismographs were connected to the P- and S-wave geophones via refraction cables. Each shot was recorded for two seconds, with data recording starting 100 ms before the actual time of the shot. Data were recorded at a sampling rate of 0.5 ms, or 2000 samples per second. This report provides the metadata needed to utilize the seismic data. Reference: Subcommittee of the SEG Engineering and Groundwater Geophysics Committee, Pullan, S. E., Chairman, 1990, Recommended standard for seismic (/radar) data files in the personal computer environment: Geophysics, vol. 55, no. 9, p. 1260-1271. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Digital Data",
"format": "XML",
"accessURL": "https://doi.org/10.5066/P9LKXZKP",
"mediaType": "application/http",
"description": "Landing page for access to the data"
},
{
"@type": "dcat:Distribution",
"title": "Original Metadata",
"format": "XML",
"mediaType": "text/xml",
"description": "The metadata original format",
"downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.5ad94505e4b0e2c2dd27aa1a.xml"
}
]
|
| identifier | http://datainventory.doi.gov/id/dataset/USGS_5ad94505e4b0e2c2dd27aa1a |
| keyword |
[
"USGS:5ad94505e4b0e2c2dd27aa1a",
"earthquakes",
"faulting (geologic)",
"hazards",
"seismic reflection methods",
"seismic refraction methods",
"seismology"
]
|
| modified | 2020-08-27T00:00:00Z |
| publisher |
{
"name": "U.S. Geological Survey",
"@type": "org:Organization"
}
|
| spatial | -122.53153107168, 38.420005674318, -122.24039337638, 38.634873230994 |
| theme |
[
"Geospatial"
]
|
| title | 2017 seismic imaging of the West Napa Fault Zone, St. Helena, California |