2017 Western Passage Tidal Energy Resource Characterization Measurements
These data are from tidal resource characterization measurements collected between April and July 2017 in Western Passage near Eastport, Maine, USA.
The dataset contains the following four sub-datasets, each of which is described in more detail in the README.pdf.
1. A bottom-mounted Teledyne RDI Workhorse 600 kHz acoustic Doppler current profiler (ADCP) was deployed at 44.92015 N, 66.98915 W in ~50 m of water from 3 April to 18 July (106 days). Data were recorded in 6-minute increments in the ENU (East, magnetic North, Up) coordinate system with bin-mapping enabled.
2. A bottom-mounted Nortek Signature 500 kHz ADCP was deployed at 44.92192 N, 66.98913 W in ~50 m of water from 4 April to 18 July (105 days). Data were sampled and recorded at 2 Hz and recorded in the ENU (East, magnetic North, Up) coordinate system.
3. Between those stations along a cross-channel transect, a Stable Tidal Turbulence Mooring (STTM) positioned ~10 m above the seabed was deployed for one week during a spring tide. The STTM was outfitted with two Nortek Vector acoustic Doppler velocimeters equipped with inertial motion units (ADVs), a bottom-tracking downward-looking Teledyne RDI Workhorse 600 kHz ADCP to provide motion-corrected flow and turbulence characteristics at high temporal resolution, and an upward-looking Teledyne RDI Sentinel V20 ADCP. The STTM was deployed at 44.92098 N, 66.98922 W from 24-31 May.
4. A vessel-mounted Teledyne RDI Workhorse 300 kHz ADCP collected current data along three transects over two days, 4-5 April.
The data processing used DOLfYN version 0.11.2. All hdf5 files (i.e., files ending in `.h5`) contained here can be opened using that version of DOLfYN (e.g., `dat = dolfyn.load('')`).
All distances are in meters (e.g., depth, range, MLLW, hab, eta, z_), and all velocities in m/s. See the DOLfYN documentation https://lkilcher.github.io/dolfyn/), and/or the Nortek and Teledyne RDI documentation for additional details.
Additional details on the dataset can be found in the README.pdf, including:
- Format details of each data file.
- How to regenerate the data-processing (using the files in the `wp2017_processing.zip` archive).
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "Levi Kilcher",
"@type": "vcard:Contact",
"hasEmail": "mailto:levi.kilcher@nrel.gov"
}
|
| dataQuality |
true
|
| description | These data are from tidal resource characterization measurements collected between April and July 2017 in Western Passage near Eastport, Maine, USA. The dataset contains the following four sub-datasets, each of which is described in more detail in the README.pdf. 1. A bottom-mounted Teledyne RDI Workhorse 600 kHz acoustic Doppler current profiler (ADCP) was deployed at 44.92015 N, 66.98915 W in ~50 m of water from 3 April to 18 July (106 days). Data were recorded in 6-minute increments in the ENU (East, magnetic North, Up) coordinate system with bin-mapping enabled. 2. A bottom-mounted Nortek Signature 500 kHz ADCP was deployed at 44.92192 N, 66.98913 W in ~50 m of water from 4 April to 18 July (105 days). Data were sampled and recorded at 2 Hz and recorded in the ENU (East, magnetic North, Up) coordinate system. 3. Between those stations along a cross-channel transect, a Stable Tidal Turbulence Mooring (STTM) positioned ~10 m above the seabed was deployed for one week during a spring tide. The STTM was outfitted with two Nortek Vector acoustic Doppler velocimeters equipped with inertial motion units (ADVs), a bottom-tracking downward-looking Teledyne RDI Workhorse 600 kHz ADCP to provide motion-corrected flow and turbulence characteristics at high temporal resolution, and an upward-looking Teledyne RDI Sentinel V20 ADCP. The STTM was deployed at 44.92098 N, 66.98922 W from 24-31 May. 4. A vessel-mounted Teledyne RDI Workhorse 300 kHz ADCP collected current data along three transects over two days, 4-5 April. The data processing used DOLfYN version 0.11.2. All hdf5 files (i.e., files ending in `.h5`) contained here can be opened using that version of DOLfYN (e.g., `dat = dolfyn.load('')`). All distances are in meters (e.g., depth, range, MLLW, hab, eta, z_), and all velocities in m/s. See the DOLfYN documentation https://lkilcher.github.io/dolfyn/), and/or the Nortek and Teledyne RDI documentation for additional details. Additional details on the dataset can be found in the README.pdf, including: - Format details of each data file. - How to regenerate the data-processing (using the files in the `wp2017_processing.zip` archive). |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "DOLfYN 0.11.2",
"format": "2",
"accessURL": "https://github.com/lkilcher/dolfyn/releases/tag/0.11.2",
"mediaType": "application/octet-stream",
"description": "This is the version DOLfYN that was used by the scripts in WP2017_processing.zip"
},
{
"@type": "dcat:Distribution",
"title": "README.pdf",
"format": "pdf",
"accessURL": "https://mhkdr.openei.org/files/323/README.pdf",
"mediaType": "application/pdf",
"description": "Complete description of dataset."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_RDI600.000",
"format": "000",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_RDI600%20%281%29.000",
"mediaType": "application/octet-stream",
"description": "Source data file for RDI 600 measurements."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_RDI600.csv.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_RDI600.csv.zip",
"mediaType": "application/zip",
"description": "5-minute averages of bottom RDI measurements in a collection of csv files."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_RDI600_cln_ETU_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_RDI600_cln_ETU_d112.h5",
"mediaType": "application/octet-stream",
"description": "Cleaned RDI data, full data record."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_RDI600_raw_ETU_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_RDI600_raw_ETU_d112.h5",
"mediaType": "application/octet-stream",
"description": "Unprocessed RDI data in hdf5/dolfyn format."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500.ad2cp",
"format": "ad2cp",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500.ad2cp",
"mediaType": "application/octet-stream",
"description": "The source data file for the bottom-mounted signature 500."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_Burst.VTC.DSEL_binmap.AVER.mat",
"format": "mat",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_Burst.VTC.DSEL_binmap.AVER.mat",
"mediaType": "application/octet-stream",
"description": "OceanContour averaged data, output to matlab format."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_IBurst.DSEL.AVER.mat",
"format": "mat",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_IBurst.DSEL.AVER.mat",
"mediaType": "application/octet-stream",
"description": "Output from OceanCountour software in Matlab format."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_June_d112_ETU.5min.csv.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_June_d112_ETU.5min.csv.zip",
"mediaType": "application/zip",
"description": "June 2017 Western Passage Sig500 data. 5-minute averaged data, csv.zip file, earth coordinates."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_June_d112_ETU.5min.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_June_d112_ETU.5min.h5",
"mediaType": "application/octet-stream",
"description": "June 2017 hdf5/dolfyn format Sig500 Data."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_May_d112_ETU.5min.csv.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_May_d112_ETU.5min.csv.zip",
"mediaType": "application/zip",
"description": "May 2017 Western Passage Sig500 data. 5-minute averaged data, csv.zip file, earth coordinates."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_May_d112_ETU.5min.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_May_d112_ETU.5min.h5",
"mediaType": "application/octet-stream",
"description": "May 2017 hdf5/dolfyn format Sig500 Data."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_Bottom_Sig500_OceanContour_masked_d112_ETU.5min.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_Bottom_Sig500_OceanContour_masked_d112_ETU.5min.h5",
"mediaType": "application/octet-stream",
"description": "Full data-record (from OceanCountour matlab file) in hdf5/dolfyn format."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_MobileTransect_LOG.xlsx",
"format": "xlsx",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_MobileTransect_LOG%20%281%29.xlsx",
"mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
"description": "Log file of Mobile Transects."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_MobileTransect_RDI300_ALLDATA.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_MobileTransect_RDI300_ALLDATA.zip",
"mediaType": "application/zip",
"description": "Mobile transect data."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVport.VEC",
"format": "VEC",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVport.VEC",
"mediaType": "application/octet-stream",
"description": "The raw (source) file from the STTM’s port Nortek Vector."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVport_read_from_VEC_INST_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVport_read_from_VEC_INST_d112.h5",
"mediaType": "application/octet-stream",
"description": "The port ADV data from file `WP2017_STTM_ADVport.VEC`, plus: defining parameters needed for motion correction, and updating the orientation matrix for magnetic declination. Data are in the instrument coordinate system."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd.VEC",
"format": "VEC",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd.VEC",
"mediaType": "application/octet-stream",
"description": "The raw (source) file from the STTM’s starboard Nortek Vector."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd_clnETU_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd_clnETU_d112.h5",
"mediaType": "application/octet-stream",
"description": "The starboard ADV data after cropping and cleaning the data following the Goring and Nikora (2002) despiking method, with Wahl (2003) correction."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd_corrected_RDI_time_1H_Bins.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd_corrected_RDI_time_1H_Bins.csv",
"mediaType": "text/csv",
"description": "Time-sync file between RDI and starboard ADV."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd_d112_ETU_5min.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd_d112_ETU_5min.csv",
"mediaType": "text/csv",
"description": "5-minute averages of ADV data in csv format"
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd_d112_ETU_5min.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd_d112_ETU_5min.h5",
"mediaType": "application/octet-stream",
"description": "The starboard ADV data after calculating 5-minute means and turbulence statistics."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd_d112_w_ulow_waterdepth_ETU.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd_d112_w_ulow_waterdepth_ETU.h5",
"mediaType": "application/octet-stream",
"description": "The starboard ADV data after motion correcting and calculating the low frequency translational motion of the STTM recorded by the STTM’s downward-looking RDI Workhorse 600 kHz ADCP in order to fully motion correct the STTM’s starboard Nortek Vector velocity data, and calculating MLLW."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_ADVstbd_read_from_VEC_INST_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_ADVstbd_read_from_VEC_INST_d112.h5",
"mediaType": "application/octet-stream",
"description": "The starboard ADV data from file `WP2017_STTM_ADVstbd.VEC`, defining parameters needed for motion correction, and updating the orientation matrix for magnetic declination. Data are in the instrument coordinate system."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_RDI.000",
"format": "000",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_RDI.000",
"mediaType": "application/octet-stream",
"description": "The raw (source) file from the STTM's downward-looking RDI Workhorse 600 kHz ADCP. See the RDI documentation for details on this file format."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_RDI_d112_5min_ETU.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_RDI_d112_5min_ETU.h5",
"mediaType": "application/octet-stream",
"description": "The 5-minute means of the vertically binned velocity data from the STTM’s downward-looking Teledyne RDI Workhorse 600 kHz ADCP."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_RDI_read_from_000_ETU_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_RDI_read_from_000_ETU_d112.h5",
"mediaType": "application/octet-stream",
"description": "The 'raw' data (read from source) in hdf5/DOLfYN format. The only change relative to the source file is that this data has been corrected for magnetic declination."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_RDI_timesynced2ADVs_clnETU_d112.h5",
"format": "h5",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_RDI_timesynced2ADVs_clnETU_d112.h5",
"mediaType": "application/octet-stream",
"description": "Contains the STTM’s downward-looking Teledyne RDI Workhorse 600 kHz ADCP data saved after syncing the Workhorse time stamp to the starboard Nortek Vector time stamp."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_V20.pd0",
"format": "pd0",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_V20.pd0",
"mediaType": "application/octet-stream",
"description": "is the source file from the STTM'S upward-looking Teledyne RDI Sentinel V20 ADCP"
},
{
"@type": "dcat:Distribution",
"title": "WP2017_STTM_v20.mat",
"format": "mat",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_STTM_v20.mat",
"mediaType": "application/octet-stream",
"description": "is the MATLAB .mat file saved after reading in `WP_SMB02_V20_May2017.pd0` using the `rdradcp` function from RDADCP_Jan18v0 at https://www.eoas.ubc.ca/~rich/#RDADCP. Data are in beam coordinates. The velocity data need bin mapping and motion correction, neither of which has been done. Here, the only data used is the depth data; it is used to calculate the STTM’s height above the bottom."
},
{
"@type": "dcat:Distribution",
"title": "WP2017_TideMet_NDBC_PSBM1.mat",
"format": "mat",
"accessURL": "https://mhkdr.openei.org/files/323/WP2017_TideMet_NDBC_PSBM1.mat",
"mediaType": "application/octet-stream",
"description": "Meteorological and tidal-height data at site."
},
{
"@type": "dcat:Distribution",
"title": "wp2017_processing.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/323/wp2017_processing.zip",
"mediaType": "application/zip",
"description": "Processing scripts for this data."
}
]
|
| DOI | 10.15473/1635227 |
| identifier | https://data.openei.org/submissions/7977 |
| issued | 2017-07-31T06:00:00Z |
| keyword |
[
"ADCP",
"Acoustic Doppler Current Profiler",
"DOLfYN",
"Hydrokinetic",
"MATLAB",
"MHK",
"MLLW",
"Marine",
"Marine Energy Resource Assessment and Characterization",
"Nortek",
"Ocean Contour",
"RDI Sentinel",
"RDI WorkHorse",
"STTM",
"Stable Tidal Turbulence Mooring",
"StableMoor",
"Teledyne",
"Western Passage",
"air pressure",
"depth",
"energy",
"flow",
"height",
"maine",
"mean lower low water",
"power",
"processed data",
"raw data",
"resource",
"resource assessment",
"resource characterization",
"sea surface height",
"tidal",
"turbulence",
"velocimetry",
"velocity"
]
|
| landingPage | https://mhkdr.openei.org/submissions/323 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2024-11-18T20:25:06Z |
| programCode |
[
"019:009"
]
|
| projectLead | Joel Cline |
| projectNumber | FY17 AOP 2141401 |
| projectTitle | Model Validation and Site Characterization for Early Deployment MHK Sites and Establishment of Wave Classification Scheme |
| publisher |
{
"name": "National Renewable Energy Laboratory",
"@type": "org:Organization"
}
|
| spatial |
"{"type":"Polygon","coordinates":[[[-180,-83],[180,-83],[180,83],[-180,83],[-180,-83]]]}"
|
| title | 2017 Western Passage Tidal Energy Resource Characterization Measurements |
