Data for "Restricted Domain Compressive Sensing for Antenna Metrology" to be submitted to IEEE Transactions on Signal Processing.

                                            [
  "006:55"
]
                                        

                                            {
  "fn": "Alex Yuffa",
  "hasEmail": "mailto:alexey.yuffa@nist.gov"
}
                                        

                                            [
  {
    "title": "Figure 1: Data RGSF concentrations",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 1, which shows the sorted concentrations of the RGSFs with Theta_1 = 0 and Theta_2 = pi. The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_1_data_RGSF_concentrations.csv"
  },
  {
    "title": "Figure 2: Data RGSF Magnitudes",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 2, which example of the RGSF magnitudes for specific cases in the m=0 mu=0 subspace. The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_2_data_RGSF_Magnitudes.csv"
  },
  {
    "title": "Figure 3: Data Reconstructions",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 3, which shows example near field reconstructions and signal to reconstruction noise ratio as calculated according to the different approaches listed Section V and using measurements limited in the polar angle to [0, 35*pi/36] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_3_data_Reconstructions_Theta1_0_Theta2_35piOver36.csv"
  },
  {
    "title": "Figure 4: Data Reconstructions",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 4, which shows example far field reconstructions and signal to reconstruction noise ratio as calculated according to the different approaches listed Section V and using measurements limited in the polar angle to [0, 35*pi/36] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_4_data_Reconstructions_Theta1_0_Theta2_35piOver36.csv"
  },
  {
    "title": "Figure 5: Data Reconstructions",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 5, which shows example near field reconstructions and signal to reconstruction noise ratio as calculated according to the different approaches listed Section V and using measurements limited in the polar angle to [0, pi/2] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_5_data_Reconstructions_Theta1_0_Theta2_piOver2.csv"
  },
  {
    "title": "Figure 6: Data Reconstructions",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 6, which shows example near field reconstructions and signal to reconstruction noise ratio as calculated according to the different approaches listed Section V and using measurements limited in the polar angle to [0, pi/2] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_6_data_Reconstructions_Theta1_0_Theta2_piOver2.csv"
  },
  {
    "title": "Figure 7: Data Reconstructions",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 7, which shows example far field reconstructions and signal to reconstruction noise ratio as calculated according to the different approaches listed Section V and using measurements limited in the polar angle to [0, pi/2] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_7_data_Reconstructions_Theta1_0_Theta2_piOver2.csv"
  },
  {
    "title": "Figure 8a: Data Reconstructions",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 8a, which shows near field signal to reconstruction noise ratio versus the RGSF cutoff parameter lambda_c as calculated according RGSF CS method and using measurements limited in the polar angle to [0, pi/2] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_8a_data_Reconstructions_Theta1_0_Theta2_piOver2_vs_lambda_c.csv"
  },
  {
    "title": "Figure 8b: Data CoefficientError",
    "mediaType": "text/csv",
    "description": "This file contains the data for Figure 8b, which shows the spherical wave coefficient error versus the RGSF cutoff parameter lambda_c as calculated according RGSF CS method and using measurements limited in the polar angle to [0, pi/2] (radians). The data is organized as described in the header (first row) of the csv file.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/Figure_8b_data_CoefficientError_Theta1_0_Theta2_piOver2_vs_lambda_c.csv"
  },
  {
    "title": "Read me file",
    "mediaType": "text/plain",
    "description": "This is a "read me" file that contains and overview of the dataset.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2550/README.txt"
  }
]
                                        

                                            [
  "compressive sensing; far-field pattern; near-field pattern; antenna characterization; Wigner d-functions; SVD"
]
                                        

                                            [
  "en"
]
                                        

                                            [
  "006:045"
]
                                        

                                            {
  "name": "National Institute of Standards and Technology",
  "@type": "org:Organization"
}
                                        

                                            [
  "Advanced Communications:Wireless (RF)"
]