Data tables of well locations, perforated intervals, and time series of hydraulic-head observations for the Central Valley Hydrologic Model (CVHM)
This digital dataset defines the well locations, perforated intervals, and time series of hydraulic-head
observations used in the calibration of the transient hydrologic model of the Central Valley flow system.
The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The
complex hydrologic system of the Central Valley is simulated using the U.S. Geological Survey (USGS)
numerical modeling code MODFLOW-FMP (Schmid and others, 2006b). This simulation is referred to
here as the Central Valley Hydrologic Model (CVHM) (Faunt, 2009). Utilizing MODFLOW-FMP, the
CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other
key processes in the Central Valley on a monthly basis from 1961-2003. The USGS and CA-DWR
maintain databases of key wells in the Central Valley that are web-accessible (http://waterdata.usgs.gov
and http://www.water.ca.gov/waterdatalibrary/, respectively). These data were combined to form a database
of available water levels throughout the Central Valley from 1961 to 2003. More than 850,000 water-level
altitude measurements from more than 21,400 wells have been compiled by the USGS or CA-DWR and
have been entered into their respective databases. However, only a small portion of these wells have both
sufficient construction information to determine the well-perforation interval and water-level measurements
for the simulation period. For model calibration, water-level altitude data were needed that were (1) distributed
spatially (both geographically and vertically) throughout the Central Valley; (2) distributed temporally
throughout the simulation period (years 1961-2003); and (3) available during both wet and dry climatic
regimes. From the available wells records, a subset of comparison wells was selected on the basis of
perforation depths, completeness of record, climatic intervals, and locations throughout the Central Valley.
Water-level altitude observations (19,725) for 206 wells were used as calibration targets during parameter
estimation. The CVHM is the most recent regional-scale model of the Central Valley developed by the
U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources
Program (see "Foreword", Chapter A, page iii, for details).
Complete Metadata
| accessLevel | public |
|---|---|
| bureauCode |
[
"010:12"
]
|
| contactPoint |
{
"fn": "Claudia C. Faunt",
"@type": "vcard:Contact",
"hasEmail": "mailto:ccfaunt@usgs.gov"
}
|
| description | This digital dataset defines the well locations, perforated intervals, and time series of hydraulic-head observations used in the calibration of the transient hydrologic model of the Central Valley flow system. The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the U.S. Geological Survey (USGS) numerical modeling code MODFLOW-FMP (Schmid and others, 2006b). This simulation is referred to here as the Central Valley Hydrologic Model (CVHM) (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The USGS and CA-DWR maintain databases of key wells in the Central Valley that are web-accessible (http://waterdata.usgs.gov and http://www.water.ca.gov/waterdatalibrary/, respectively). These data were combined to form a database of available water levels throughout the Central Valley from 1961 to 2003. More than 850,000 water-level altitude measurements from more than 21,400 wells have been compiled by the USGS or CA-DWR and have been entered into their respective databases. However, only a small portion of these wells have both sufficient construction information to determine the well-perforation interval and water-level measurements for the simulation period. For model calibration, water-level altitude data were needed that were (1) distributed spatially (both geographically and vertically) throughout the Central Valley; (2) distributed temporally throughout the simulation period (years 1961-2003); and (3) available during both wet and dry climatic regimes. From the available wells records, a subset of comparison wells was selected on the basis of perforation depths, completeness of record, climatic intervals, and locations throughout the Central Valley. Water-level altitude observations (19,725) for 206 wells were used as calibration targets during parameter estimation. The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details). |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Digital Data",
"format": "XML",
"accessURL": "https://doi.org/10.5066/P909RLAR",
"mediaType": "application/http",
"description": "Landing page for access to the data"
},
{
"@type": "dcat:Distribution",
"title": "Original Metadata",
"format": "XML",
"mediaType": "text/xml",
"description": "The metadata original format",
"downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.afc000a4-e1ea-4c9d-a0b5-e4337dd9bee0.xml"
}
]
|
| identifier | http://datainventory.doi.gov/id/dataset/USGS_afc000a4-e1ea-4c9d-a0b5-e4337dd9bee0 |
| keyword |
[
"Alameda County",
"Amador County",
"Butte County",
"CV-RASA",
"Calaveras County",
"California",
"Central Valley",
"Central Valley Aquifer",
"Central Valley Hydrologic Model",
"Central Valley, California",
"Colusa County",
"Contra Costa County",
"El Dorado County",
"Flow Model CVHM",
"Fresno County",
"Glenn County",
"Groundwater Availability of the Central Valley Aquifer",
"Humboldt County",
"Kern County",
"Kings County",
"Lake County",
"Madera County",
"Mariposa County",
"Mendocino County",
"Merced County",
"Monterey County",
"Napa County",
"Nevada County",
"Placer County",
"Sacramento County",
"Sacramento Valley",
"San Benito County",
"San Joaquin County",
"San Joaquin Valley",
"San Luis Obispo County",
"Santa Barbara County",
"Santa Clara County",
"Shasta County",
"Solano County",
"Sonoma County",
"Stanislaus County",
"Sutter County",
"Tehama County",
"Texture model",
"Trinity County",
"Tulare County",
"Tuolumne County",
"USGS:afc000a4-e1ea-4c9d-a0b5-e4337dd9bee0",
"Ventura County",
"Yolo County",
"Yuba County",
"geoscientificinformation",
"groundwater",
"hydrogeology",
"hydrology",
"inlandWaters",
"model"
]
|
| modified | 2020-11-17T00:00:00Z |
| publisher |
{
"name": "U.S. Geological Survey",
"@type": "org:Organization"
}
|
| spatial | -122.429470, 35.021853, -118.778823, 40.390176 |
| theme |
[
"Geospatial"
]
|
| title | Data tables of well locations, perforated intervals, and time series of hydraulic-head observations for the Central Valley Hydrologic Model (CVHM) |
