Grid cells used for Surface-Water Network for the Central Valley Hydrologic Model
This digital dataset contains the segment and reaches for the surface-water network by model cell for the Central Valley
Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California.
The complex hydrologic system of the Central Valley is simulated using the U.S. Geological Survey (USGS) numerical
modeling code MODFLOW-FMP (Schmid and others, 2006 ). This simulation is referred to here as the CVHM
(Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture,
land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active
modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology
of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater
pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance
of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated
groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in
the valley. Even so, it covers about 3,000 kilometers of surface-water and is simulated using 208 stream segments that
represent 2244 stream reaches, with 43 inflows and 66 diversion locations providing 64 routed and 41 non-routed deliveries.
Most of these inflows are regulated by dams and most of the deliveries are conveyed through an extensive canal network.
The routed deliveries are conveyed through the simulated surface-water network, while the non-routed delivery conveyance
typically occurs through small canals or diversion ditches and are not directly simulated. Much of the surface-water diversion
and delivery information was compiled by the California Department of Water Resources (DWR) for 21 water-balance subregions
(WBSs) covering the valley floor (C. Brush, California Department of Water Resources, written commun., February 21, 2007).
The CVHM is the most recent regional-scale model of the Central Valley developed by the USGS. The CVHM was developed
as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).
Complete Metadata
| accessLevel | public |
|---|---|
| bureauCode |
[
"010:12"
]
|
| contactPoint |
{
"fn": "Claudia C. Faunt",
"@type": "vcard:Contact",
"hasEmail": "mailto:ccfaunt@usgs.gov"
}
|
| description | This digital dataset contains the segment and reaches for the surface-water network by model cell for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the U.S. Geological Survey (USGS) numerical modeling code MODFLOW-FMP (Schmid and others, 2006 ). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Even so, it covers about 3,000 kilometers of surface-water and is simulated using 208 stream segments that represent 2244 stream reaches, with 43 inflows and 66 diversion locations providing 64 routed and 41 non-routed deliveries. Most of these inflows are regulated by dams and most of the deliveries are conveyed through an extensive canal network. The routed deliveries are conveyed through the simulated surface-water network, while the non-routed delivery conveyance typically occurs through small canals or diversion ditches and are not directly simulated. Much of the surface-water diversion and delivery information was compiled by the California Department of Water Resources (DWR) for 21 water-balance subregions (WBSs) covering the valley floor (C. Brush, California Department of Water Resources, written commun., February 21, 2007). The CVHM is the most recent regional-scale model of the Central Valley developed by the USGS. The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details). |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Digital Data",
"format": "XML",
"accessURL": "https://doi.org/10.5066/P94B0A2I",
"mediaType": "application/http",
"description": "Landing page for access to the data"
},
{
"@type": "dcat:Distribution",
"title": "Original Metadata",
"format": "XML",
"mediaType": "text/xml",
"description": "The metadata original format",
"downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.f457f5b3-a855-4bd9-864c-5ff71e4473e5.xml"
}
]
|
| identifier | http://datainventory.doi.gov/id/dataset/USGS_f457f5b3-a855-4bd9-864c-5ff71e4473e5 |
| keyword |
[
"Alameda County",
"Amador County",
"Butte County",
"CV-RASA",
"Calaveras County",
"California",
"Central Valley",
"Central Valley Aquifer",
"Central Valley Hydrologic Model",
"Central Valley, California",
"Colusa County",
"Contra Costa County",
"El Dorado County",
"Flow Model CVHM",
"Fresno County",
"Glenn County",
"Groundwater Availability of the Central Valley Aquifer",
"Humboldt County",
"Kern County",
"Kings County",
"Lake County",
"Madera County",
"Mariposa County",
"Mendocino County",
"Merced County",
"Monterey County",
"Napa County",
"Nevada County",
"Placer County",
"Sacramento County",
"Sacramento Valley",
"San Benito County",
"San Joaquin County",
"San Joaquin Valley",
"San Luis Obispo County",
"Santa Barbara County",
"Santa Clara County",
"Shasta County",
"Solano County",
"Sonoma County",
"Stanislaus County",
"Sutter County",
"Tehama County",
"Texture Model",
"Trinity County",
"Tulare County",
"Tuolumne County",
"USGS:f457f5b3-a855-4bd9-864c-5ff71e4473e5",
"Ventura County",
"Yolo County",
"Yuba County",
"geoscientificinformation",
"groundwater",
"hydrogeology",
"hydrology",
"inlandWaters",
"model",
"reach streams",
"segment",
"surface water"
]
|
| modified | 2020-11-17T00:00:00Z |
| publisher |
{
"name": "U.S. Geological Survey",
"@type": "org:Organization"
}
|
| spatial | -122.545209, 35.215898, -118.707417, 40.629216 |
| theme |
[
"Geospatial"
]
|
| title | Grid cells used for Surface-Water Network for the Central Valley Hydrologic Model |
