Return to search results
HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data
This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository is based on an updated WEC-Sim model using laboratory data to tune and refine the original WEC-Sim model for the V1.0 HERO WEC.
The 135 wave cases represent waves with the following wave height and wave period ranges:
- Significant Wave Height: 0.25 - 3.75m in 0.25m increments
- Wave Period: 5 - 13 sec in 1 sec increments
Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 100 second ramp time, a total simulation time of 3,100 seconds, and a simulation time-step of 0.005s. A reference table has been included to map each multi condition run (MCR) case with each wave condition.
Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the simulation runs, in the same increments. The following matrices are included:
- Power Abs: The average absorbed power from the WEC (calculated from anchor reaction force and heave velocity)
- Power Hyd: The average hydraulic power output at pump (calculated from pump output flow and pressure)
- Power - Hyd ROi: The average hydraulic power measured at the RO system inlet (calculated from RO system pressure and flow (pre-accumulator))
- Flow - Pump out: The average flowrate measured at the pump outlet
- Flow - Perm: The average permeate (clean water) production
- Flow - RO (pre): The average flowrate measured at the inlet of the RO system before the accumulators
- Flow - RO (post): The average flowrate measured after the accumulator bank in the RO system
- Pressure - RO: The average pressure measured at the inlet of the RO system
This data set has been developed by the National Renewable Energy Laboratory, operated by the Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "Scott Jenne",
"@type": "vcard:Contact",
"hasEmail": "mailto:dale.jenne@nrel.gov"
}
|
| dataQuality |
true
|
| description | This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository is based on an updated WEC-Sim model using laboratory data to tune and refine the original WEC-Sim model for the V1.0 HERO WEC. The 135 wave cases represent waves with the following wave height and wave period ranges: - Significant Wave Height: 0.25 - 3.75m in 0.25m increments - Wave Period: 5 - 13 sec in 1 sec increments Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 100 second ramp time, a total simulation time of 3,100 seconds, and a simulation time-step of 0.005s. A reference table has been included to map each multi condition run (MCR) case with each wave condition. Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the simulation runs, in the same increments. The following matrices are included: - Power Abs: The average absorbed power from the WEC (calculated from anchor reaction force and heave velocity) - Power Hyd: The average hydraulic power output at pump (calculated from pump output flow and pressure) - Power - Hyd ROi: The average hydraulic power measured at the RO system inlet (calculated from RO system pressure and flow (pre-accumulator)) - Flow - Pump out: The average flowrate measured at the pump outlet - Flow - Perm: The average permeate (clean water) production - Flow - RO (pre): The average flowrate measured at the inlet of the RO system before the accumulators - Flow - RO (post): The average flowrate measured after the accumulator bank in the RO system - Pressure - RO: The average pressure measured at the inlet of the RO system This data set has been developed by the National Renewable Energy Laboratory, operated by the Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "WEC-Sim Results.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/554/HERO2024Hyd_WECSim.zip",
"mediaType": "application/zip",
"description": "Complete set of 135 WEC-Sim results used for waves ranging from 0.25-3.75m and 5-13sec."
},
{
"@type": "dcat:Distribution",
"title": "Reference Table.xlsx",
"format": "xlsx",
"accessURL": "https://mhkdr.openei.org/files/554/HEROV1_2024_MCRruns.xlsx",
"mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
"description": "Reference table to map each MCR case with the corresponding wave condition. Columns include 'Case #', 'Hs [m]'. and 'Tp (sec)'. Hs refers to simulated wave height and Tp to period."
},
{
"@type": "dcat:Distribution",
"title": "MCR Summary Data Matrices.xlsm",
"format": "xlsm",
"accessURL": "https://mhkdr.openei.org/files/554/MCR%20Matrices.xlsm",
"mediaType": "application/octet-stream",
"description": "Spreadsheet that includes matrices of relevant power, flow, and pressure data from all simulations. The file includes a summary sheet detailing all matrices/data included."
},
{
"@type": "dcat:Distribution",
"title": "Matrices_pngfiles.zip",
"format": "zip",
"accessURL": "https://mhkdr.openei.org/files/554/Matrices_pngfiles.zip",
"mediaType": "application/zip",
"description": "Zip file that includes image files (.png) for each of the matrices included in MCR Matrices.xlsm. "
},
{
"@type": "dcat:Distribution",
"title": "Updated WEC-Sim Model",
"format": "HTML",
"accessURL": "https://mhkdr.openei.org/submissions/553",
"mediaType": "text/html",
"description": "Files that are needed to simulate NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter). This requires the user to have already installed WEC-Sim. In addition to the standard toolboxes that are required to run WEC-Sim the user will also need the Simscape Fluids and Simscape Driveline packages. "
},
{
"@type": "dcat:Distribution",
"title": "HERO WEC OpenEI homepage",
"format": "HTML",
"accessURL": "https://openei.org/wiki/HERO-WEC",
"mediaType": "text/html",
"description": "Homepage on OpenEI.org for HERO-WEC project."
}
]
|
| DOI | 10.15473/2426346 |
| identifier | https://data.openei.org/submissions/8094 |
| issued | 2024-07-01T06:00:00Z |
| keyword |
[
"Desalination",
"HERO WEC",
"Hydrokinetic",
"MHK",
"Marine",
"Power Matrix",
"Simulation",
"WEC",
"WEC-Sim",
"energy",
"flow",
"model",
"multi condition run",
"power",
"pressure",
"processed data",
"raw data",
"simulation results",
"summary data",
"wave height",
"wave period"
]
|
| landingPage | https://mhkdr.openei.org/submissions/554 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2025-01-02T17:24:47Z |
| programCode |
[
"019:009"
]
|
| projectLead | Simon Gore |
| projectNumber | FY23 AOP 2.2.6.404 |
| projectTitle | Wave-Powered Desalination Deployment & Analysis |
| publisher |
{
"name": "National Renewable Energy Laboratory",
"@type": "org:Organization"
}
|
| spatial |
"{"type":"Polygon","coordinates":[[[-105.21547951534217,39.914015503041625],[-105.21544218063354,39.914015503041625],[-105.21544218063354,39.91468288338219],[-105.21547951534217,39.91468288338219],[-105.21547951534217,39.914015503041625]]]}"
|
| title | HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data |
