Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter
Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were considered, as detailed in the conference paper "Application of the Most Likely Extreme Response Method for Wave Energy Converters" by Quon et al. (see resource below). These sea states were extrapolated from conditions near Humboldt Bay, California. Focused waves were generated using the MLER module of the Wave Design Response Toolbox (WDRT) and specified at the inlet boundary conditions. The device was constrained to heave only and a PTO was not modeled.
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "Eliot Quon",
"@type": "vcard:Contact",
"hasEmail": "mailto:eliot.quon@nrel.gov"
}
|
| dataQuality |
true
|
| description | Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were considered, as detailed in the conference paper "Application of the Most Likely Extreme Response Method for Wave Energy Converters" by Quon et al. (see resource below). These sea states were extrapolated from conditions near Humboldt Bay, California. Focused waves were generated using the MLER module of the Wave Design Response Toolbox (WDRT) and specified at the inlet boundary conditions. The device was constrained to heave only and a PTO was not modeled. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Heave Results.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/145/heave_results.csv",
"mediaType": "text/csv",
"description": "Device heave results from computational fluid dynamics (CFD) simulation."
},
{
"@type": "dcat:Distribution",
"title": "Sea State 1.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/145/sea1.csv",
"mediaType": "text/csv",
"description": "Input data for sea state 1"
},
{
"@type": "dcat:Distribution",
"title": "Sea State 2.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/145/sea2.csv",
"mediaType": "text/csv",
"description": "Input data for sea state 2"
},
{
"@type": "dcat:Distribution",
"title": "Sea State 3.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/145/sea3.csv",
"mediaType": "text/csv",
"description": "Input data for sea state 3"
},
{
"@type": "dcat:Distribution",
"title": "Sea State 4.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/145/sea4.csv",
"mediaType": "text/csv",
"description": "Input data for sea state 4"
},
{
"@type": "dcat:Distribution",
"title": "Sea State 5.csv",
"format": "csv",
"accessURL": "https://mhkdr.openei.org/files/145/sea5.csv",
"mediaType": "text/csv",
"description": "Input data for sea state 5"
},
{
"@type": "dcat:Distribution",
"title": "Quon et al OMAE 2016 Paper",
"format": "pdf",
"accessURL": "https://www.nrel.gov/docs/fy16osti/65926.pdf",
"mediaType": "application/pdf",
"description": "Paper titled "Application of the Most Likely Extreme Response Method for Wave Energy Converters," presented at the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016)"
}
]
|
| DOI | 10.15473/1460411 |
| identifier | https://data.openei.org/submissions/7834 |
| issued | 2016-06-17T06:00:00Z |
| keyword |
[
"CA",
"CFD",
"California",
"Humboldt Bay",
"Hydrokinetic",
"MHK",
"MLER",
"Marine",
"RAOs",
"WDRT",
"WEC",
"absorber",
"amplitude",
"analysis",
"boundary",
"computationlal fluid dynamics",
"conditions",
"converter",
"design",
"ellipsoid",
"energy",
"extreme",
"float",
"inlet",
"likely",
"modeling",
"module",
"most",
"numerical",
"operators",
"point",
"point absorber buoy",
"power",
"response",
"sea",
"spectral",
"toolbox",
"wave"
]
|
| landingPage | https://mhkdr.openei.org/submissions/145 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2020-07-20T19:53:00Z |
| programCode |
[
"019:009"
]
|
| projectLead | Alison LaBonte |
| projectNumber | FY16 AOP 2111401 |
| projectTitle | Wave Energy Converter Modeling |
| publisher |
{
"name": "National Renewable Energy Laboratory",
"@type": "org:Organization"
}
|
| spatial |
"{"type":"Polygon","coordinates":[[[-124.2426,39.754737495438],[-105.22121429443,39.754737495438],[-105.22121429443,40.7195],[-124.2426,40.7195],[-124.2426,39.754737495438]]]}"
|
| title | Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter |