Orthomosaic imagery for the intertidal zone at Post Point, Bellingham Bay, WA, 2019-06-06
This portion of the data release presents a high-resolution orthomosaic images of the intertidal zone at Post Point, Bellingham Bay, WA. The orthomosaics were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-06. The orthomosaics are presented with two resolutions: one image, covering the entire survey area, has a resolution of 2 centimeters per pixel; the other image which was derived from a lower-altitude flight, covers an inset area within the main survey area and has a resolution of 1 centimeter per pixel. The raw imagery used to create the orthomosaics was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using a built-in intervalometer. For the main orthomosaic, the UAS was flown at an approximate altitude of 70 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 1.8 centimeters per pixel. For the higher-resolution orthomosaic, the UAS was flown at an approximate altitude of 35 meters (AGL), resulting in a nominal ground-sample-distance (GSD) of 0.9 centimeters per pixel. The raw imagery was geotagged using positions from the UAS onboard single-frequency autonomous GPS. Nineteen temporary ground control points (GCPs) were distributed throughout each survey area to establish survey control. The GCPs consisted of a combination of small square tarps with black-and-white cross patterns and "X" marks placed on the ground using temporary chalk. The GCP positions were measured using post-processed kinematic (PPK) GPS, using corrections from a GPS base station located approximately 5 kilometers from the study area. The orthomosaic images are provided in a three-band RGB format, with 8-bit unsigned integer values compressed using high-quality JPEG compression. The images have been formatted as cloud optimized GeoTIFFs with internal overviews and masks to facilitate cloud-based queries and display.
Complete Metadata
| accessLevel | public |
|---|---|
| bureauCode |
[
"010:12"
]
|
| contactPoint |
{
"fn": "PCMSC Science Data Coordinator",
"@type": "vcard:Contact",
"hasEmail": "mailto:pcmsc_data@usgs.gov"
}
|
| description | This portion of the data release presents a high-resolution orthomosaic images of the intertidal zone at Post Point, Bellingham Bay, WA. The orthomosaics were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-06. The orthomosaics are presented with two resolutions: one image, covering the entire survey area, has a resolution of 2 centimeters per pixel; the other image which was derived from a lower-altitude flight, covers an inset area within the main survey area and has a resolution of 1 centimeter per pixel. The raw imagery used to create the orthomosaics was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using a built-in intervalometer. For the main orthomosaic, the UAS was flown at an approximate altitude of 70 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 1.8 centimeters per pixel. For the higher-resolution orthomosaic, the UAS was flown at an approximate altitude of 35 meters (AGL), resulting in a nominal ground-sample-distance (GSD) of 0.9 centimeters per pixel. The raw imagery was geotagged using positions from the UAS onboard single-frequency autonomous GPS. Nineteen temporary ground control points (GCPs) were distributed throughout each survey area to establish survey control. The GCPs consisted of a combination of small square tarps with black-and-white cross patterns and "X" marks placed on the ground using temporary chalk. The GCP positions were measured using post-processed kinematic (PPK) GPS, using corrections from a GPS base station located approximately 5 kilometers from the study area. The orthomosaic images are provided in a three-band RGB format, with 8-bit unsigned integer values compressed using high-quality JPEG compression. The images have been formatted as cloud optimized GeoTIFFs with internal overviews and masks to facilitate cloud-based queries and display. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Digital Data",
"format": "XML",
"accessURL": "https://doi.org/10.5066/P94LH20J",
"mediaType": "application/http",
"description": "Landing page for access to the data"
},
{
"@type": "dcat:Distribution",
"title": "Original Metadata",
"format": "XML",
"mediaType": "text/xml",
"description": "The metadata original format",
"downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.5ef53db282ced62aaae6a0b0.xml"
}
]
|
| identifier | http://datainventory.doi.gov/id/dataset/USGS_5ef53db282ced62aaae6a0b0 |
| keyword |
[
"Bathymetry and Elevation",
"Bellingham",
"Bellingham Bay",
"CHMRP",
"Coastal and Marine Hazards and Resources Program",
"Fairhaven",
"PCMSC",
"Pacific Coastal and Marine Science Center",
"Post Point",
"Puget Sound",
"Salish Sea",
"SfM",
"South Bellingham",
"State of Washington",
"Structure-from-motion",
"U.S. Geological Survey",
"UAS",
"USGS",
"USGS:5ef53db282ced62aaae6a0b0",
"Unmanned aerial system",
"Whatcom County",
"aerial and satellite photography",
"aerial photography",
"altimetry",
"coastal processes",
"elevation",
"geomorphology",
"geoscientificInformation",
"geospatial datasets",
"image mosaics",
"orthophotography",
"photography",
"remote sensing",
"topographic maps",
"topography"
]
|
| modified | 2021-02-22T00:00:00Z |
| publisher |
{
"name": "U.S. Geological Survey",
"@type": "org:Organization"
}
|
| spatial | -122.5207, 48.7110, -122.5156, 48.7204 |
| theme |
[
"Geospatial"
]
|
| title | Orthomosaic imagery for the intertidal zone at Post Point, Bellingham Bay, WA, 2019-06-06 |