Percent Coarse in wells in 15 meter increments and Texture Model Percent Coarse at Lattice Points for the Central Valley from Faunt (2009)
This digital dataset contains the percentage of coarse-grained deposits in wells in 15 meter increments
and the percentage of coarse-grained deposits in texture model lattice points interpolated from the well
data for the Central Valley. The texture model was used as input data for the hydraulic properties portion
of the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000
square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated
using the U.S. Geological Survey (USGS) numerical modeling code MODFLOW-FMP (Schmid and others,
2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the
CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key
processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334
square-miles on a finite-difference grid comprising 441 rows and 98 columns. Slightly less than 50 percent
of the cells are active. The CVHM model grid has a uniform horizontal discretization of 1x1 square mile and
is oriented parallel to the valley axis, 34 degrees west of north (Faunt, 2009). In order to better characterize
the aquifer-system deposits, lithologic data from approximately 8,500 well-drillers logs of boreholes ranging
in depth from 12 to 3,000 feet below land surface were compiled and analyzed. The percentage of coarse-grained
sediment, or texture, then was computed from this classification for each 50-foot depth interval of the driller's
logs. A 3D texture model was developed by interpolating the percentage of coarse-grained deposits onto a 1-mile
spatial grid at 50-foot depth intervals from land surface to 2,800 feet below land surface. The CVHM is the most
recent regional-scale model of the Central Valley developed by the USGS. The CVHM was developed as part
of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).
Complete Metadata
| accessLevel | public |
|---|---|
| bureauCode |
[
"010:12"
]
|
| contactPoint |
{
"fn": "Claudia C. Faunt",
"@type": "vcard:Contact",
"hasEmail": "mailto:ccfaunt@usgs.gov"
}
|
| description | This digital dataset contains the percentage of coarse-grained deposits in wells in 15 meter increments and the percentage of coarse-grained deposits in texture model lattice points interpolated from the well data for the Central Valley. The texture model was used as input data for the hydraulic properties portion of the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the U.S. Geological Survey (USGS) numerical modeling code MODFLOW-FMP (Schmid and others, 2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles on a finite-difference grid comprising 441 rows and 98 columns. Slightly less than 50 percent of the cells are active. The CVHM model grid has a uniform horizontal discretization of 1x1 square mile and is oriented parallel to the valley axis, 34 degrees west of north (Faunt, 2009). In order to better characterize the aquifer-system deposits, lithologic data from approximately 8,500 well-drillers logs of boreholes ranging in depth from 12 to 3,000 feet below land surface were compiled and analyzed. The percentage of coarse-grained sediment, or texture, then was computed from this classification for each 50-foot depth interval of the driller's logs. A 3D texture model was developed by interpolating the percentage of coarse-grained deposits onto a 1-mile spatial grid at 50-foot depth intervals from land surface to 2,800 feet below land surface. The CVHM is the most recent regional-scale model of the Central Valley developed by the USGS. The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details). |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Digital Data",
"format": "XML",
"accessURL": "https://doi.org/10.5066/P9ESIXW2",
"mediaType": "application/http",
"description": "Landing page for access to the data"
},
{
"@type": "dcat:Distribution",
"title": "Original Metadata",
"format": "XML",
"mediaType": "text/xml",
"description": "The metadata original format",
"downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.a53bb527-441b-4d84-af83-48a84339d829.xml"
}
]
|
| identifier | http://datainventory.doi.gov/id/dataset/USGS_a53bb527-441b-4d84-af83-48a84339d829 |
| keyword |
[
"Alameda County",
"Amador County",
"Butte County",
"CV-RASA",
"Calaveras County",
"California",
"Central Valley",
"Central Valley Aquifer",
"Central Valley Hydrologic Model",
"Central Valley, California",
"Colusa County",
"Contra Costa County",
"El Dorado County",
"Flow Model CVHM",
"Fresno County",
"Glenn County",
"Groundwater Availability of the Central Valley Aquifer",
"Humboldt County",
"Kern County",
"Kings County",
"Lake County",
"Madera County",
"Mariposa County",
"Mendocino County",
"Merced County",
"Monterey County",
"Napa County",
"Nevada County",
"Placer County",
"Sacramento County",
"Sacramento Valley",
"San Benito County",
"San Joaquin County",
"San Joaquin Valley",
"San Luis Obispo County",
"Santa Barbara County",
"Santa Clara County",
"Shasta County",
"Solano County",
"Sonoma County",
"Stanislaus County",
"Sutter County",
"Tehama County",
"Texture Model",
"Trinity County",
"Tulare County",
"Tuolumne County",
"USGS:a53bb527-441b-4d84-af83-48a84339d829",
"Ventura County",
"Yolo County",
"Yuba County",
"deposit",
"geostatistics",
"groundwater",
"hydrogeology",
"hydrology",
"inlandWaters",
"model",
"unconsolidated sediments"
]
|
| modified | 2020-11-17T00:00:00Z |
| publisher |
{
"name": "U.S. Geological Survey",
"@type": "org:Organization"
}
|
| spatial | -123.831528, 34.519871, -117.916328, 40.748631 |
| theme |
[
"Geospatial"
]
|
| title | Percent Coarse in wells in 15 meter increments and Texture Model Percent Coarse at Lattice Points for the Central Valley from Faunt (2009) |
