Skip to main content
U.S. flag

An official website of the United States government

This site is currently in beta, and your feedback is helping shape its ongoing development.

TES/Aura L2 Carbonyl Sulfide Nadir V007

Published by NASA/LARC/SD/ASDC | National Aeronautics and Space Administration | Metadata Last Checked: October 06, 2025 | Last Modified: 2025-07-17
TL2OCSN_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Limb Version 7 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It contains atmospheric vertical profile estimates and associated errors (diagonals and covariance matrices), along with retrieved surface temperature, cloud effective optical depth, column estimates, quality flags, averaging kernels and a priori constraint vectors. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations” The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files, each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. Ho

Find Related Datasets

Click any tag below to search for similar datasets

Complete Metadata
@type dcat:Dataset
accessLevel public
bureauCode 
                                            [
  "026:00"
]
contactPoint 
                                            {
  "fn": "Scott Gluck",
  "@type": "vcard:Contact",
  "hasEmail": "mailto:scott.gluck@jpl.nasa.gov"
}
description TL2OCSN_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Limb Version 7 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It contains atmospheric vertical profile estimates and associated errors (diagonals and covariance matrices), along with retrieved surface temperature, cloud effective optical depth, column estimates, quality flags, averaging kernels and a priori constraint vectors. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations” The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files, each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. Ho
distribution 
                                            [
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's user's guide",
    "format": "PDF",
    "mediaType": "application/pdf",
    "description": "AVDC TES Lite products user’s guide",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/guide/TES_Lite_Products_Users_Guide.pdf"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's data quality document",
    "format": "PDF",
    "mediaType": "application/pdf",
    "description": "Aura-TES L2 Products: Version 2 Data Quality Description",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/quality_summaries/L2_products_v002.pdf"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's data quality document",
    "format": "PDF",
    "mediaType": "application/pdf",
    "description": "Aura-TES L2 Products: Version 7 Data Quality Description",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/quality_summaries/L2_products_V007.pdf"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's read me document",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "Basic IDL Tools for extraction information from TES L2 HDF Product files",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/readme/README_L2_ReadSoftware.txt"
  },
  {
    "@type": "dcat:Distribution",
    "title": "This dataset's landing page",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "DOI data set landing page for TL2OCSN_7",
    "downloadURL": "https://doi.org/10.5067/AURA/TES/TL2OCSN_L2.007"
  },
  {
    "@type": "dcat:Distribution",
    "title": "Download this dataset through Earthdata Search",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "Earthdata Search for TL2OCSN_7 (NASA Application to search, discover, visualize, refine, and access NASA Earth Observation data)",
    "downloadURL": "https://search.earthdata.nasa.gov/search/granules?p=C1331888267-LARC"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's data citation policy",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "How to cite ASDC data",
    "downloadURL": "https://asdc.larc.nasa.gov/citing-data"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's algorithm theoretical basis document",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "NASA EOS ATB Documents: TES",
    "downloadURL": "https://eospso.gsfc.nasa.gov/atbd-category/53"
  },
  {
    "@type": "dcat:Distribution",
    "title": "Google Scholar search results",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "Search results for publications that cite this dataset by its DOI.",
    "downloadURL": "https://scholar.google.com/scholar?q=10.5067%2FAURA%2FTES%2FTL2OCSN_L2.007"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's user's guide",
    "format": "PDF",
    "mediaType": "application/pdf",
    "description": "TES Level 2 (L2) Data User's Guide (Up to & including Version 8 data)",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/guide/TESDataUsersGuideV8_0_March_27_2020_FV-8_rh.pdf"
  },
  {
    "@type": "dcat:Distribution",
    "title": "Downloadable software applications",
    "format": "TAR",
    "mediaType": "application/x-tar",
    "description": "TES Level 2 Read Software Package - Direct File Download (.tar)",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/read_software/TES_L2_ReadSoftware.tar"
  },
  {
    "@type": "dcat:Distribution",
    "title": "View this dataset's processing history",
    "format": "PDF",
    "mediaType": "application/pdf",
    "description": "TES Level 2 Versioning - Level 2 Standard and Special Observation Products",
    "downloadURL": "https://asdc.larc.nasa.gov/documents/tes/readme/level_2_std.pdf"
  },
  {
    "@type": "dcat:Distribution",
    "title": "The dataset's project home page",
    "format": "HTML",
    "mediaType": "text/html",
    "description": "TES project home page",
    "downloadURL": "https://tes.jpl.nasa.gov/"
  }
]
identifier C1331888267-LARC
issued 2015-04-08
keyword 
                                            [
  "air-quality",
  "atmosphere",
  "atmospheric-chemistry",
  "earth-science"
]
landingPage https://doi.org/10.5067/AURA/TES/TL2OCSN_L2.007
language 
                                            [
  "en-US"
]
modified 2025-07-17
programCode 
                                            [
  "026:001"
]
publisher 
                                            {
  "name": "NASA/LARC/SD/ASDC",
  "@type": "org:Organization"
}
spatial -180.0 -90.0 180.0 90.0
temporal 2004-08-22T00:00:00Z/2018-01-22T23:59:59Z
theme 
                                            [
  "TES",
  "geospatial"
]
title TES/Aura L2 Carbonyl Sulfide Nadir V007

data.gov

An official website of the GSA's Technology Transformation Services

Looking for U.S. government information and services?
Visit USA.gov