Return to search results
UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence F - Raw Data
**Overview**
Sequence F: Downwind High Cone (F)
This test sequence used a downwind, rigid turbine with an 18° cone angle. The wind speed
ranged from 10 m/s to 20 m/s. Excessive inertial loading due to the high cone angle prevented
operation at lower wind speeds. Yaw angles of ±20° were achieved. The blade tip pitch was 3°.
The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter
dampers were replaced with rigid links, and these two channels were flagged as not applicable by
setting the measured values in the data file to –99999.99 Nm. The teeter link was replaced with a
shorter bar so the load cell was not installed during this test. However, the teeter link load cell channel was flagged as not applicable by setting the measured values in the data file to
-99999.99 N.
**Data Details**
File naming information can be found in the attached Word document "Sequence F Filename Key", copied from the Phase VI Test Report.
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "Lee Fingersh",
"@type": "vcard:Contact",
"hasEmail": "mailto:lee.fingersh@nrel.gov"
}
|
| dataQuality |
true
|
| description | **Overview** Sequence F: Downwind High Cone (F) This test sequence used a downwind, rigid turbine with an 18° cone angle. The wind speed ranged from 10 m/s to 20 m/s. Excessive inertial loading due to the high cone angle prevented operation at lower wind speeds. Yaw angles of ±20° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link was replaced with a shorter bar so the load cell was not installed during this test. However, the teeter link load cell channel was flagged as not applicable by setting the measured values in the data file to -99999.99 N. **Data Details** File naming information can be found in the attached Word document "Sequence F Filename Key", copied from the Phase VI Test Report. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "uae6/uae6.z05.00",
"format": "00",
"accessURL": "https://a2e.energy.gov/data/uae6/uae6.z05.00",
"mediaType": "application/octet-stream",
"description": "Main dataset landing page with options to request/download"
}
]
|
| DOI | 10.21947/1483641 |
| identifier | https://data.openei.org/submissions/4201 |
| issued | 2018-11-28T00:00:00Z |
| keyword |
[
"00",
"Raw Data",
"Sequence F",
"UAE6",
"Unsteady Aerodynamics Experiment Phase VI NREL-NASA Ames Wind Tunnel Experiment",
"Wind Tunnel Tests Data",
"a2e",
"atmosphere to electrons",
"eere",
"uae6",
"weto",
"wind",
"z05"
]
|
| landingPage | https://a2e.energy.gov/data/uae6/uae6.z05.00 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2020-03-27T00:00:00Z |
| programCode |
[
"019:010"
]
|
| projectNumber |
"67025"
|
| projectTitle | Wind Data Hub |
| publisher |
{
"name": "Wind Energy Technologies Office (WETO)",
"@type": "org:Organization"
}
|
| title | UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence F - Raw Data |
