Return to search results
Utah FORGE 1-2551: Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores - Workshop Presentation and Report
Included here are a presentation recording, slides, and report on the Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores project by Colorado School of Mines, presented by Dr. William W. Fleckenstein. One goal of the project is to develop and demonstrate the use of low-cost, rapid multistage fracture stimulation technology with cemented casing frac sleeves that eliminates packers used in both conventional stimulation and injection flow control. The second goal is to develop and demonstrate the devices to effectively detect and control the flow of heat-carrier fluid solely from a long-reach injector through the network of induced and existing fractures and produced from an open-hole long-reach well to improve heat recovery. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "William Fleckenstein",
"@type": "vcard:Contact",
"hasEmail": "mailto:wflecken@mines.edu"
}
|
| dataQuality |
true
|
| description | Included here are a presentation recording, slides, and report on the Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores project by Colorado School of Mines, presented by Dr. William W. Fleckenstein. One goal of the project is to develop and demonstrate the use of low-cost, rapid multistage fracture stimulation technology with cemented casing frac sleeves that eliminates packers used in both conventional stimulation and injection flow control. The second goal is to develop and demonstrate the devices to effectively detect and control the flow of heat-carrier fluid solely from a long-reach injector through the network of induced and existing fractures and produced from an open-hole long-reach well to improve heat recovery. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Presentation Slides.pdf",
"format": "pdf",
"accessURL": "https://gdr.openei.org/files/1534/1-2551-CSM-Fleckenstein%202023%20Annual%20Workshop%20Presentation%20Slides.pdf",
"mediaType": "application/pdf",
"description": "This is a PDF of the presentation slides featured in the associated workshop presentation recording."
},
{
"@type": "dcat:Distribution",
"title": "Workshop Report.pdf",
"format": "pdf",
"accessURL": "https://gdr.openei.org/files/1534/1-2551-CSM-Fleckenstein%202023%20Annual%20Workshop%20Report.pdf",
"mediaType": "application/pdf",
"description": "This is a project report compiled with the presentation for the workshop. The document outlines various project aspects, such as objectives, technical barriers and targets, approach, timeline, accomplishments, challenges, and future plans."
},
{
"@type": "dcat:Distribution",
"title": "Presentation Recording.mp4",
"format": "mp4",
"accessURL": "https://gdr.openei.org/files/1534/Utah%20FORGE%201-2551-CSM%20%202023%20Annual%20Workshop%20Presentation.mp4",
"mediaType": "application/octet-stream",
"description": "The presentation followed a peer review format comprised of two parts: a formal presentation roughly lasting 20 minutes followed by a Q&A discussion lasting about 25 minutes."
}
]
|
| DOI | 10.15121/2001493 |
| identifier | https://data.openei.org/submissions/7621 |
| issued | 2023-09-08T06:00:00Z |
| keyword |
[
"2023",
"EGS",
"Utah FORGE",
"annual workshop",
"energy",
"flow control",
"geothermal",
"heat-carrier fluid",
"horizontal wellbore",
"injection",
"long-reach injector",
"multi-stage fracturing system",
"multistage fracture stimulation",
"report",
"stimulation",
"stimulation technology",
"well tractor",
"zonal isolation"
]
|
| landingPage | https://gdr.openei.org/submissions/1534 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2024-01-10T20:11:51Z |
| programCode |
[
"019:006"
]
|
| projectLead | Lauren Boyd |
| projectNumber | EE0007080 |
| projectTitle | Utah FORGE |
| publisher |
{
"name": "Colorado School of Mines",
"@type": "org:Organization"
}
|
| spatial |
"{"type":"Polygon","coordinates":[[[-112.916367,38.483935],[-112.879748,38.483935],[-112.879748,38.5148],[-112.916367,38.5148],[-112.916367,38.483935]]]}"
|
| title | Utah FORGE 1-2551: Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores - Workshop Presentation and Report |
