• Organization: National Institute of Standards and Technology
• Updated: 2017-01-05 00:00:00

SRM 1297 Stainless Steel (SAE 201) - 'This Standard Reference Material (SRM) is intended for use in optical emission and x-ray spectrometric methods of analysis. It is in the form of a disk...

• Organization: Department of the Interior
• Updated: 2020-10-15T18:47:47Z

Profilometry of 316L stainless steel disks that are cold rolled, additively manufactured, additively manufactured and heat treated, and additively manufactured having undergone a sensitization and...

• html
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2017-01-05 00:00:00

This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. ...

• Organization: Department of the Interior
• Updated: 2024-01-26T16:49:43Z

This final report is an analysis of Powder Bed Fusion (PBF) stainless steel 316L and its suitability for Bureau of Reclamation (Reclamation) purposes. An open cube was printed using PBF additive...

• html
• pdf

• Organization: Department of the Interior
• Updated: 2022-10-21T00:00:00Z

The files in this data release (Kellogg and others, 2022) are those referenced in the journal article by Evans and others (2022) entitled “Biofilms as Potential Reservoirs of Stony Coral Tissue...

• xml
• xml

• Organization: National Institute of Standards and Technology
• Updated: 2025-02-28 00:00:00

This dataset contains compressive stress-strain data (strain, stress and strain rate curves and initial temperatures) for compression experiments performed on wrought and AM 17-4...

• zip
• none
• none
• none

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The cross beam(4) of the axle is made of special steel, especially a high chrome alloyed stainless steel. The cross beam has a V or U-shaped cross section over the predominant part of its length.

• html

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

Method involves producing conical base ring having truncated torus, coating stainless steel support with scatter-sinter layer, which are baked to give sintered friction lining. Sintered friction...

• html

• Organization: U.S. Environmental Protection Agency
• Updated: 2019-09-11

This study evaluated reuse of lime softening sludge, generated from drinking water treatment utilities, as an environmental sorbent for capturing SO2 and heavy metals in wet scrubbers of...

• xml

• Organization: Department of Agriculture
• Updated: 2024-08-30

Salmonella is a pathogenic microorganism linked to foodborne outbreaks associated with egg and egg products. This microorganism can resist sanitation of the egg processing equipment and form...

• none
• none
• none
• none
• none
• none
• +38 more

• Organization: National Oceanic and Atmospheric Administration, Department of Commerce
• Updated: 2016-07-27T22:54:54.000+00:00

Chlorophyll-a fluorescence data were collected using a WET Labs ECO FL fluorometer (http://www.wetlabs.com/eco-fl) with the following manufacturer specifications: excitation/emission wavelengths:...

• none

• Organization: National Institute of Standards and Technology
• Updated: 2018-10-23

This data set supports the technical paper and supporting information documents accepted to Steel Research International (https://doi.org/10.1002/srin.201800370). The technical paper presents...

• html
• none
• none
• none
• none
• none
• +239 more

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The module (40) consists of a holder for a container used e.g. in the preparation of food on a large scale. It is made from stainless steel tubing or rod, bent into shape and having its ends...

• html

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

A strip treatment line in which downstream of the processing roll stand for stainless steel strip, first and second tension rolls are provided to directly form a prestretching zone A for elastic...

• html

• Organization: National Oceanic and Atmospheric Administration, Department of Commerce
• Updated: 2016-07-27T22:53:58.000+00:00

Chlorophyll-a fluorescence data were collected using a WET Labs ECO FL fluorometer (http://www.wetlabs.com/eco-fl) with the following manufacturer specifications: excitation/emission wavelengths:...

• none

• Organization: National Oceanic and Atmospheric Administration, Department of Commerce
• Updated: 2015-11-03T17:55:30.000+00:00

Chlorophyll-a fluorescence data were collected using a WET Labs ECO FL fluorometer (http://www.wetlabs.com/eco-fl) with the following manufacturer specifications: excitation/emission wavelengths:...

• none

• Organization: City of New York
• Updated: 2025-12-24

DOT, in coordination with our Coordinated Street Furniture vendor, JCDecaux, has installed bicycle parking shelters around the City. Each shelter contains stainless steel bike racks for eight...

• json
• rdf
• xml
• csv

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The panel, comprising a cellular core (1) with a sounddamping layer (2) on one side and a total reflective layer (3) on the other, has the sound-damping layer made from a structural component (4)...

• html

• Organization: U.S. Department of Health & Human Services
• Updated: 2025-09-06

The method involves perforating a rigid stainless steel sheet on all its surface and cutting the sheet to obtain a blank at a final shape of a circular basket. The blank is stamped in its central...

• html

• Organization: U.S. Environmental Protection Agency
• Updated: 2024-09-01

The data include a data dictionary (read first), a test log, a spreadsheet containing the UVC intensity measurements (along with temperature and relative humidity), and the microbiological data...

• xml
• xml
• xml
• xml
• xml
• xml
• +26 more