Return to search results
Utah FORGE: Well 16A(78)-32 Drilling Data
This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule.
Rig move in began 10/22/2020 and drilling commenced on 10/30/2020, and total depth was reached on 12/18/2020. Drilling was followed by a diagnostic fracture injection test (DFIT), logging, and circulating casing. The rig was released on 1/12/2021.
The upper part of the well was drilled vertically through approximately 4,700 feet of sediments before penetrating into high strength, crystalline granite. The well was deviated at a 65 degree angle from vertical after reaching a depth of 6,000 ft. This angle was maintained for the remainder of the well's trajectory. The well ultimately reached a true vertical depth of 8,559 feet, and a total measured depth of 10,987 feet. Preliminary measurements indicate temperatures at the "toe" of the well will exceed 442 degrees F (228 degrees C). Approximately 74 ft of core of the granitic and metamorphic rocks that will form the FORGE reservoir was also recovered.
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"019:20"
]
|
| contactPoint |
{
"fn": "John McLennan",
"@type": "vcard:Contact",
"hasEmail": "mailto:jmclennan@egi.utah.edu"
}
|
| dataQuality |
true
|
| description | This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule. Rig move in began 10/22/2020 and drilling commenced on 10/30/2020, and total depth was reached on 12/18/2020. Drilling was followed by a diagnostic fracture injection test (DFIT), logging, and circulating casing. The rig was released on 1/12/2021. The upper part of the well was drilled vertically through approximately 4,700 feet of sediments before penetrating into high strength, crystalline granite. The well was deviated at a 65 degree angle from vertical after reaching a depth of 6,000 ft. This angle was maintained for the remainder of the well's trajectory. The well ultimately reached a true vertical depth of 8,559 feet, and a total measured depth of 10,987 feet. Preliminary measurements indicate temperatures at the "toe" of the well will exceed 442 degrees F (228 degrees C). Approximately 74 ft of core of the granitic and metamorphic rocks that will form the FORGE reservoir was also recovered. |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "16A78-32 Final Mud Log.las",
"format": "las",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32%20Final%20mud%20log.las",
"mediaType": "application/octet-stream",
"description": "This is the final mud log from well 16A(78)-32. This data was acquired by Horizon Well Logging, Inc. on December 24th, 2020. The start depth was 130 feet and the stop depth was 10,987 feet. This log contains information on the mud pump, penetration rate, weight on bit, C02, mud flow, mud loss, pit volume, and temperatures in and out. The data is in a .LAS text file."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Standard Survey Report Higher Depth Resolution.pdf",
"format": "pdf",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32%20PVA.pdf",
"mediaType": "application/pdf",
"description": "Standard drilling survey report for Utah FORGE Well 16A(78)-32. Includes planned versus actual well trajectory plots and survey reports. Data is recorded at varying depth intervals of less than 100'."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Standard Survey Report Lower Depth Resolution.pdf",
"format": "pdf",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32%20PVA.pdf",
"mediaType": "application/pdf",
"description": "Standard drilling survey report for Utah FORGE Well 16A(78)-32. Includes planned versus actual well trajectory plots and survey reports. Data is recorded at 100' depth intervals."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Survey Data Higher Depth Resolution.xlsx",
"format": "xlsx",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32%20Survey.xlsx",
"mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
"description": " Directional drilling survey data from drilling of Well 16A(78)-32. Data is recorded at varying depth intervals of less than 100'"
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Survey Data Lower Depth Resolution.xlsx",
"format": "xlsx",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32%20Survey.xlsx",
"mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
"description": "Directional drilling survey data from drilling of Well 16A(78)-32. Data is recorded at 100' depth intervals."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Daily Reports Complete Set.zip",
"format": "zip",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32_Daily_Reports.zip",
"mediaType": "application/zip",
"description": "*This file includes additional reports that were not included in '16A78-32 Daily Reports.zip.' Daily drilling and completion reports from the drilling of Utah FORGE Well 16A(78)-32. The files are named as follows: Utah_Forge_FORGE_16A_(78)-32_[PHASE]-C_[STARTMMDDYYYY]_[ENDMMDDYYYY]_[VERSION]_reporttmp.pdf where [PHASE] is either drilling or completion and [VERSION] is a number."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Pason Data - .las Data and Report.zip",
"format": "zip",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32_Pason_Data.zip",
"mediaType": "application/zip",
"description": "This Pason dataset includes the .las Pason 10 second interval report and the compiled Drilling Daily Performance Report."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Drilling Data 10s Intervals.csv",
"format": "csv",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32_time_data_10s_intervals.csv",
"mediaType": "text/csv",
"description": "Detailed well data recorded at 10 second intervals. "
},
{
"@type": "dcat:Distribution",
"title": "Standard 16A78-32 Drilling Data 10s Intervals.csv",
"format": "csv",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32_time_data_10s_intervals_standard.csv",
"mediaType": "text/csv",
"description": "This file is a Drilling Data Standard auto-generated copy. Detailed well data recorded at 10 second intervals. "
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Drilling Data 1s Intervals.csv",
"format": "csv",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32_time_data_1s_intervals.csv",
"mediaType": "text/csv",
"description": "Detailed well data recorded at 1 second intervals. NOTE: Opening this file in Microsoft Excel will lead to data loss because the file is longer than Excel's maximum allowed number of rows."
},
{
"@type": "dcat:Distribution",
"title": "Standard 16A78-32 Drilling Data 1s Intervals.csv",
"format": "csv",
"accessURL": "https://gdr.openei.org/files/1283/16A%2878%29-32_time_data_1s_intervals_standard.csv",
"mediaType": "text/csv",
"description": "This file is a Drilling Data Standard auto-generated copy. Detailed well data recorded at 1 second intervals. NOTE: Opening this file in Microsoft Excel will lead to data loss because the file is longer than Excel's maximum allowed number of rows."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Daily Reports.zip",
"format": "zip",
"accessURL": "https://gdr.openei.org/files/1283/2021-well-16a78-32-daily-reports.zip",
"mediaType": "application/zip",
"description": "Daily drilling and completion reports from the drilling of Utah FORGE Well 16A(78)-32. The files are named as follows: Utah_Forge_FORGE_16A_(78)-32_[PHASE]-C_[STARTMMDDYYYY]_[ENDMMDDYYYY]_[VERSION]_reporttmp.pdf where [PHASE] is either drilling or completion and [VERSION] is a number."
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Summary of Daily Operations.pdf",
"format": "pdf",
"accessURL": "https://gdr.openei.org/files/1283/Composite-C%20%281%29.pdf",
"mediaType": "application/pdf",
"description": "Document including daily summaries of drilling operations"
},
{
"@type": "dcat:Distribution",
"title": "Rig Photos.zip",
"format": "zip",
"accessURL": "https://gdr.openei.org/files/1283/Rig%20Photos.zip",
"mediaType": "application/zip",
"description": "Photos of the drill rig during drilling of well 16A(78)-32"
},
{
"@type": "dcat:Distribution",
"title": "16A78-32 Survey Final.pdf",
"format": "pdf",
"accessURL": "https://gdr.openei.org/files/1283/U%20OF%20U%20WELL%20No.%20FORGE%2016A%20%2878%29-32%20SURVEY%20FINAL.pdf",
"mediaType": "application/pdf",
"description": "This file contains the final wellhead survey for well 16A(78)-32, including the Latitude and Longitude coordinates and its elevation."
}
]
|
| DOI | 10.15121/1776602 |
| identifier | https://data.openei.org/submissions/7401 |
| issued | 2021-01-08T07:00:00Z |
| keyword |
[
"16A78-32",
"EGS",
"FORGE",
"Utah",
"Utah FORGE",
"deep well",
"deviated",
"directional",
"drilling",
"energy",
"geothermal",
"highly deviated",
"operations",
"pason",
"pason data",
"photos",
"raw data",
"rig",
"survey",
"time series",
"trajectory"
]
|
| landingPage | https://gdr.openei.org/submissions/1283 |
| license | https://creativecommons.org/licenses/by/4.0/ |
| modified | 2024-08-14T21:28:47Z |
| programCode |
[
"019:006"
]
|
| projectLead | Lauren Boyd |
| projectNumber | EE0007080 |
| projectTitle | Utah FORGE |
| publisher |
{
"name": "Energy and Geoscience Institute at the University of Utah",
"@type": "org:Organization"
}
|
| spatial |
"{"type":"Polygon","coordinates":[[[-112.916367,38.483935],[-112.879748,38.483935],[-112.879748,38.5148],[-112.916367,38.5148],[-112.916367,38.483935]]]}"
|
| title | Utah FORGE: Well 16A(78)-32 Drilling Data |
